Intergraph(R) PV Elite(R) Webinar on October 1st to Discuss ASME Pressure Vessel Code Changes Including Those Mandatory January 2014
[ Back ]   [ More News ]   [ Home ]
Intergraph(R) PV Elite(R) Webinar on October 1st to Discuss ASME Pressure Vessel Code Changes Including Those Mandatory January 2014

HOUSTON, TX -- (Marketwired) -- Sep 18, 2013 -- Intergraph is hosting a PV Elite webinar on October 1, 2013 at 10:00 a.m. CT that will review the latest code changes in ASME Section VIII, Division 1 and 2 and Section II, Part D, including code changes that will be mandatory in January 2014. Division 1 provides requirements for the design, fabrication, inspection, testing, and certification of pressure vessels operating at either internal or external pressures, including fired and unfired vessels. Division 2 provides for more vigorous requirements on materials, design, and nondestructive examination, including vessels for human occupancy such as in the diving industry. Section II, Part D provides standards for material properties that go into vessels. The webinar leader will be Scott Mayeux, director of development for Pressure Vessels and Exchanger Solutions at Intergraph.

For information about the webinar, visit http://coade.typepad.com/coadeinsider/2013/08/whats-new-in-asme-code-section-viiidivisions-1-2-section-ii-part-d2013.html. For a link to register, visit http://icas.intergraph.com/pveliteoctober2013.

For more information about Intergraph PV Elite 2013, visit http://coade.typepad.com/coadeinsider/2012/11/pv-elite-2013-release-announced-for-january-2013.html. For information on PV Elite and other Intergraph analysis products, visit http://www.intergraph.com/ppm/analysis.aspx.

About Intergraph CADWorx & Analysis Solutions
The Intergraph CADWorx & Analysis Solutions (CAS) products allow design and engineering to share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. They include CADWorx Plant Design Suite for AutoCAD®-based intelligent plant design modeling, process schematics and automatic production of plant design deliverables; CADWorx DraftPro for intelligent 2D design and layout; CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for vessel and exchanger design and analysis; and TANK for the design and analysis of oil storage tanks. For information on Intergraph CAS, visit www.coade.com.

Intergraph, the Intergraph logo, CADWorx and CAESAR II are registered trademarks, and PV Elite, and TANK are trademarks of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. © 2013 Intergraph Corp. All rights reserved.

 

Add to Digg Bookmark with del.icio.us Add to Newsvine