Xilinx Introduces Breakthrough Zynq RFSoC DFE for Mass 5G Radio Deployments
[ Back ]   [ More News ]   [ Home ]
Xilinx Introduces Breakthrough Zynq RFSoC DFE for Mass 5G Radio Deployments

New class of adaptive radio platforms combines flexibility for evolving 5G standards and a hardened radio digital front-end for performance, power, and cost effectiveness

SAN JOSE, Calif. — (BUSINESS WIRE) — October 27, 2020 — Xilinx, Inc., (NASDAQ: XLNX) today introduced Zynq® RFSoC DFE, a breakthrough class of adaptive radio platforms designed to meet the evolving standards of 5G NR wireless applications. Zynq RFSoC DFE combines hardened digital front-end (DFE) blocks and adaptable logic to build high performance, low power, and cost-effective 5G NR radio solutions for a broad array of use cases ranging across 5G low-, mid-, and high- band spectrum. Zynq RFSoC DFE offers the best balance of technologies between the cost economies of an ASIC using hardened blocks and the flexibility, scalability, and time-to-market benefits of a programmable and adaptive SoC.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20201027005317/en/

5G radio requires solutions that not only meet bandwidth, power, and cost challenges for widespread deployment, but must also adapt to the three key 5G use cases: enhanced Mobile Broadband, massive Machine Type Communication, and Ultra-Reliable Low-Latency Communication. In addition, solutions must scale for evolving 5G standards such as OpenRAN (O-RAN) as well as new and disruptive 5G business models. Zynq RFSoC DFE integrates hardened DFE application-specific blocks for 5G NR performance and power savings while also offering the flexibility to integrate programmable adaptive logic to enable a futureproof solution for evolving 5G 3GPP and O-RAN radio architectures.

"For the first time, Xilinx is providing a wireless radio platform with more hardened application-specific IP than adaptive logic to address low power and low cost 5G requirements,” said Liam Madden, executive vice president and general manager, Wired and Wireless Group at Xilinx. “With the market needs around 5G evolving, integrated RF solutions need to be adaptable to address future standards. Zynq RFSoC DFE provides the optimal balance between that adaptability and fixed function IP.”

Zynq RFSoC DFE offers 2X performance-per-watt compared to its prior generation and scales from small cell to massive MIMO macrocells. The solution is the industry’s only direct RF platform that enables carrier aggregation/sharing, multi-mode, multi-band 400MHz instantaneous bandwidth in all FR1 bands, and emerging bands up to 7.125GHz. When used as a millimeter wave intermediate frequency transceiver, it provides up to 1,600MHz of instantaneous bandwidth. Zynq RFSoC DFE is architected such that customers can bypass or customize the hard IP blocks. For example, customers can leverage Xilinx’s field-proven DPD that supports existing and emerging GaN power amplifiers or insert their own unique DPD IP.

“As 5G continues to evolve in both commercial deployments and new use cases, it is critical for the supply chain to provide flexible components for vendors to create cost effective, adaptive and future-proof equipment. Open RAN takes this requirement to a much higher level, where flexible designs are paramount to its success,” said Dimitris Mavrakis, senior research director of 5G at ABI Research. “With its balance of hardening and adaptable logic, Zynq RFSoC DFE is a unique offering which combines the cost characteristics typically found in ASICs while providing the design flexibility and customization available in an FPGA.”

Availability

Zynq RFSoC DFE design documentation and support is available to early access customers, with shipments expected during the first half of 2021. More information on the entire family of Zynq UltraScale+ RFSoCs, including the newest Zynq RFSoC DFE, can be found at www.xilinx.com/rfsoc-dfe.

Learn more about the breakthrough Zynq RFSoC DFE at Xilinx Adapt: 5G, a two-day virtual technical event from November 18-19. Join us to hear about the latest wireless solutions from Xilinx, along with sessions on key industry trends and how to stay ahead of the 5G deployment curve. Register here.

Follow Xilinx on Twitter, LinkedIn, and Facebook.

About Xilinx

Xilinx, Inc. develops highly flexible and adaptive processing platforms that enable rapid innovation across a variety of technologies - from the cloud, to the edge, to the endpoint. Xilinx is the inventor of the FPGA and Adaptive SoCs (including our Adaptive Compute Acceleration Platform, or ACAP), designed to deliver the most dynamic computing technology in the industry. We collaborate with our customers to create scalable, differentiated and intelligent solutions that enable the adaptable, intelligent and connected world of the future. For more information, visit xilinx.com.

© Copyright 2020 Xilinx, Inc. Xilinx, the Xilinx logo and other designated brands included herein are trademarks of Xilinx in the United States and other countries.

Source: Xilinx Newsroom

Category: Product Announcements



Contact:

PR Contact:
Xilinx PR
Media@Xilinx.com