Stratasys and AM Craft Partner to Drive Growth in 3D Part Manufacturing for Aviation
[ Back ]   [ More News ]   [ Home ]
Stratasys and AM Craft Partner to Drive Growth in 3D Part Manufacturing for Aviation

Aligning Stratasys’s deep technical expertise and leadership in the aerospace industry with AM Craft’s distributed production model for certified aviation parts positions both companies for sustained growth in aviation part manufacturing

EDEN PRAIRIE, Minn. & REHOVOT, Israel & RIGA, Latvia — (BUSINESS WIRE) — June 24, 2024Stratasys Ltd. (NASDAQ: SSYS) and aviation manufacturing pioneer AM Craft, announced today that they are partnering to align the two companies’ efforts to grow the demand for flight-certified 3D printed parts in the aviation industry. The companies signed a definitive commercial collaboration agreement, along with Stratasys’ strategic investment in AM Craft.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20240624165604/en/

These 3D Printed custom cup holders and trays are printed in color and installed in regional jet cockpits without need for further finishing. (Photo: Business Wire)

These 3D Printed custom cup holders and trays are printed in color and installed in regional jet cockpits without need for further finishing. (Photo: Business Wire)

Holding an EASA Part 21G Production Organization Approval, AM Craft solves a key barrier to broader adoption of 3D printed parts in the aviation industry by delivering airworthiness certified parts to airlines, MROs, and OEMs. Additive manufacturing has strong appeal as a supply chain solution in these markets due to the long sustainment life of aircraft and the resulting challenges in forecasting and stocking replacement parts.

“The low volume, high mix nature of the aviation aftermarket has resulted in extreme challenges to supply even the most minor of parts necessary to keep global fleets flying,” said Stratasys Senior Vice President Jeff Hemenway. “Additive manufacturing addresses those challenges by cost-effectively producing at the rates and volumes required. AM Craft’s EASA-approved approach to certification takes this burden off the end customer.”

To facilitate the partnership with Stratasys, Hemenway is joining the AM Craft board of directors.

Didzis Dejus, CEO of AM Craft, adds, “Aligning with Stratasys will further strengthen the confidence of our customers that we can supply them with needed parts. Given Stratasys’ leadership in additive manufacturing we will continue to drive the adoption of 3D printing in the airline and MRO industries. Their technology is an ideal fit for aviation.”

AM Craft currently produces aviation components in Europe and has demonstrated the ability to extend their Production Organization Approval to Paradigm 3D, a partner company in Dubai, UAE. Stratasys currently engages in certified aviation parts manufacturing through subsidiary Additive Flight Solutions (AFS) in Singapore. In structuring this partnership, AM Craft will own and operate AFS, further extending AM Craft’s production network to Southeast Asia, and add a Hamburg facility later this year.

The combined network operates 13 printers under EASA 21G approval, which have produced more than 28,000 flight parts to date. A future step within the partnership will be to evaluate collaboration with US-based Stratasys Direct Manufacturing, and their substantial install base of similar equipment.

“Aviation is a global industry, and our customers see localization of production as a major advantage that AM Craft can offer. By aligning with Stratasys and Additive Flight Solutions, we are better able to meet our customers’ needs to be in more major MRO hubs,” said Scott Sevcik, AM Craft VP of Strategy and Business Development. “In addition to being where our customers need us to be, it’s also critical that we continue to build the catalog of parts. We believe that this collaboration with Stratasys, as well as other major aviation suppliers and distributers, will help us to accelerate our future growth.”

Stratasys and AM Craft both look forward to further developing additional aspects of their collaboration to accelerate the adoption of additive manufacturing within the aviation industry.

About AM Craft

AM Craft is an end-to-end aviation supplier that leverages expertise in polymer additive manufacturing, design, airworthiness certification, and a distributed production methodology to ensure customers have the right part, at the right time, in the right location. AM Craft’s distributed production methodology combines in-house design and manufacturing with independent local production partners under a unified certification umbrella to bring flight part production to the point of need. Headquartered in Riga, Latvia, AM Craft operates on four continents and serves a global customer base in the aviation industry. To learn more about AM Craft, visit www.am-craft.com or LinkedIn.

About Stratasys

Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries such as aerospace, automotive, consumer products and healthcare. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage in the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.



Contact:

Media and Investor contacts:

Stratasys Corporate & North America
Chris Reese
chris.reese@stratasys.com
+1 651 357 0877

Asia
Kalyani Dwivedi
Kalyani.Dwivedi@stratasys.com
+91 80 6746 2606

Brazil, Central America and South America
Erica Massini
Erica.Massini@stratasys.com
+55 (11) 2626-9229

Stratasys Corporate & Israel
Erik Snider
Erik.Snider@stratasys.com
+972 74 745 6053

Investor Relations
Yonah Lloyd
Yonah.Lloyd@stratasys.com
+972 74 745 4919