MAPPS Urges State Legislatures to Enable the Societal Benefits of Aerial Surveys Using UAS's

Dec 16, 2014 -- MAPPS Executive Director John Palatiello called on state legislatures to exempt aerial surveying and mapping from any legislation limiting unmanned aerial vehicles (UAV) or unmanned aerial systems (UAS), sometimes derisively called "drones".

In remarks before the National Conference of State Legislatures (NCSL), Palatiello said photogrammetry and remote sensing provides enormous "societal benefit" and state legislation that limits the use of emerging UAS technology will have "unintended consequences".

"Photogrammetry and remote sensing, making measurements from aerial photographs taken from manned aircraft, and satellite images, respectively, to make maps, has been in existence for decades without problem or controversy," Palatiello said. "In many states, photogrammetry is defined as the practice of surveying, requiring supervision by a licensed professional. There are adequate safeguards to protect the public when these activities are performed from UAVs," he said.

The MAPPS chief executive noted aerial surveying and mapping were specifically mentioned in the FAA " Roadmap" for UAS and earlier this week, FAA approved "exemptions" for commercial operation of UAVs by two MAPPS member firms, Woolpert and Trimble.

He noted that some state legislation has recognized the benefits of mapping from a UAV, and urged NCSL to support such a policy.

"As much as 90 percent of government information has a geospatial information component and up to 80 percent of the information managed by business is connected to a specific location," Palatiello told the legislators. "Aerial geospatial data acquisition contributes to E911 emergency response and police dispatching systems, precision agriculture, environmental protection, emergency "blue tarp" surveys to support hurricane response, engineering, transportation and infrastructure, and electoral district maps. Geospatial data enables the delivery of critical government services to your constituents and the use of UAVs will make such activities more effective and economical."

Palatiello said UAVs for geospatial collection will not "dwell over an individual citizen or home, and will not peer into windows." He noted that existing "Peeping Tom" laws also protect individual citizen privacy. "If you left this hotel and walked down Connecticut Avenue for lunch today, you were surveilled far more than you would ever be by a UAV," he said at remarks before the NCSL conference at the Marriott Wardman Park Hotel in Washington, DC. He recommended privacy legislation that focuses on the individual citizen in a manner that is "agnostic" to individual technologies, such as UAV.

Palatiello said "Aerial geospatial data acquisition using UAS/UAV provides significant societal benefit and is NOT a threat to individual citizen privacy, and should NOT be limited. Any state efforts to impose limits on UAV/UAS should exempt aerial mapping."

Palatiello was joined in the state legislative session by State Representative Shelley Hughes (R-AK), State Senator Daniel Biss (D-IL), and FAA Assistant General Counsel Mark Bury. MAPPS is part of a partnership with NCSL that is researching policy issues related to UAVs.

 

 

Featured Video
Editorial
Jobs
Equipment Engineer, Raxium for Google at Fremont, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Mechanical Engineer 2 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise