UltraSoC adds deadlock detection to SoC analysis, debug and profiling tools

Addresses “one of the trickiest problems in SoC development”

CAMBRIDGE, United Kingdom – UltraSoC today announced that it has added deadlock detection capabilities within its products for SoC analysis, profiling and debug. The new features allow SoC architects, developers and debug engineers to detect and diagnose hard-to-find corner cases which can cause complex SoCs to hang or stall intermittently and unpredictably, sometimes after days of continuous normal operation.

“Our customers tell us that intermittent deadlock and stall conditions are amongst the hardest problems to solve in their SoC designs,” said Gadge Panesar, UltraSoC CTO. “These conditions are a major contributor to the current crisis in the SoC industry. Conventional approaches either ignore the problem, or attempt to deal with it by generating massive, unmanageable data sets. UltraSoC takes a smarter approach, focusing on generating meaningful, actionable information; for the first time chip design teams can truly understand the behavior of today’s complex SoCs.”

UltraSoC technology allows chip designers to efficiently and intelligently “look inside” their products, at wire speed, during normal operation. The new deadlock detection capabilities are targeted at particularly difficult conditions that can cause devices to fail intermittently and unpredictably, including bus and software deadlocks.

Bus deadlocks occur when a processor is waiting for a response from another sub-system via an on-chip bus such as AXI or OCP, but the response never arrives. Traditionally, the only way of isolating such problems has been to attempt to continuously trace and output all bus activity, requiring a high-bandwidth off-chip connection to gather the data, and difficult offline analysis software of huge data-sets. The UltraSoC solution uses a “smart” on-chip bus monitor that is protocol-aware and can be triggered when the time taken for a bus transaction exceeds a programmable limit. When triggered by a deadlocked transaction, the system identifies the complete transaction ID and address, guiding the engineer’s attention to both the master and slave of the problem.

Software deadlocks are increasingly common in today’s SoCs. In a typical scenario, two different software processes might use a locking mechanism to govern shared access to common on-chip resources: for example another core, hardware peripherals or the capabilities of another software process. Problems can arise when each CPU believes that the other has locked its access to the shared resources. In this case UltraSoC provides an on-chip status monitor which can be used to detect the fault condition, halt the processors and initiate data capture to isolate the problem. As multi-core systems and heterogenous architectures become more common this becomes ever more important. UltraSoc is a vendor-neutral architecture, supporting many different bus protocols and processor families (including ARM, MIPS, Xtensa, CEVA and others), making it possible to solve these situations.

SoC debug and silicon validation are key challenges facing the global electronics industry today. UltraSoC’s technology creates an on-chip debug infrastructure that enables pre- and post-silicon debug, de-risking the process of chip design, improving time-to-market, increasing quality and reducing costs.

UltraSoC will be demonstrating its new deadlock detection capabilities at  ARM TechCon(Booth 215, Santa Clara Convention Center, CA, 10 – 12 November 2015) and  Semisrael Expo (Booth 27, Avenue Convention Center, Airport City, Israel, 17 November 2015).

Featured Video
Editorial
Jobs
Mechanical Engineer 3 for Lam Research at Fremont, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Equipment Engineer, Raxium for Google at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise