4DSP Delivers the World's 1st Dual UltraScale, FMC+, 6U VPX Board

AUSTIN, TX--(Marketwired - June 16, 2016) - 4DSP LLC Delivers the world's 1st 6U OpenVPX COTS Board with both UltraScale and VITA 57.4 Compliant FMC+ I/O. With the power of Xilinx UltraScale the VP868 is capable of meeting advanced application requirements today and tomorrow. The two VITA 57.4 Compliant FMC+ sites make the VP868 the world's most flexible and powerful COTS FPGA board. The VP868 can support all FMC compliant boards as well as future FMC+ enabled devices. Doubling the I/O density was not enough, the VP868 doubles the processing power too. The VP868 features two Xilinx UltraScale FPGAs with up to 36GB of DDR3 SDRAM and was designed to allow for lower risk migration to UltraScale+ devices in the future. The VP868 also features a powerful 7000 series Zynq embedded processor with 1GB of DDR3 for computational offload and board resource management. The Zynq processor is further enabled with a single FMC LPC site for further onboard I/O capabilities.

"The VPX868 was designed to meet the needs of today's applications and tomorrows," said James Sweeny, Principle Hardware Engineer at 4DSP. "Our customers allow no compromise on state-of-the-art technology and product quality. The VP868 was designed within our AS91000C certified engineering process and is the most advanced and high quality product we have ever released."

When combined with 4DSP State-Of-The-Art FMC Technology such as the recently released FMC120, many applications solutions are possible -- from modern radar signal processing to telecommunication offload. Products like the VP868 have allowed 4DSP customers to accelerate deployment of advanced reconfigurable computation. The VP868 was designed to enable engineers to quickly migrate from the lab to deployment. The board is available in commercial and industrial temperature ratings as well as air and conduction cooled configurations.

More details about this product can be found on the following page: VP868

Features

  • Dual Xilinx UltraScale FPGAs
  • Kintex Ultrascale: XCKU095, XCKU115
  • Virtex Ultrascale: XCVU080, XCVU095, XCVU125, XCVU160, XCVU190
  • Over 100 Gb/s Inter FPGA Communication Bandwidth
  • Dual FMC+ Sites (Vita 57.4)
  • Support for All 4DSP FMC Modules
  • Support for all Vita Compliant 3rd Party FMC Modules
  • Embedded Zynq Processor with 1GB DDR3 Memory
  • Single LPC FMC Site w/fixed 1.8V Vadj, direct to Zynq Processor
  • 2x GigaBit Ethernet with 4DSP IP Core
  • 36 GB Onboard DDR3 SDRAM Memory w/ ECC
  • VITA 65 OpenVPX Compliant
  • Expandable Storage with SSD Daughter Card
  • High Performance 4DSP PCIe IP Engine
  • Air and Conduction Cool Options Available

Applications

  • Radar & Sonar
  • Electronic Warfare
  • Beamforming
  • Software defined radio (SDR)
  • 4x4 MIMO
  • Experimental Physics
  • Analog record and playback systems
  • Aerospace and test instrumentation

Image Available: http://www.marketwire.com/library/MwGo/2016/6/16/11G103106/Images/VP868_Top_No_Heat_Sink_HiRes-c5b5dc12708caaf78aa92a11b15361a7.JPG


Haydn Nelson

Email Contact


Featured Video
Editorial
Jobs
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Equipment Engineer, Raxium for Google at Fremont, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Mechanical Engineer 2 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise