Cepton Introduces Lightweight 3D LiDAR Sensing Solution for UAV Mapping

SORA 200 3D LiDAR brings UAV mapping to new heights for partner LiDAR USA

LAS VEGAS — (BUSINESS WIRE) — October 24, 2017Cepton Technologies, Inc., a provider of 3D LiDAR sensing solutions for automotive, industrial and mapping applications, announced today the launch of SORA 200, its lightweight 3D LiDAR sensor, at the annual Commercial UAV Expo. SORA 200 delivers long-range, high-resolution and low-cost mapping capabilities to unmanned aerial vehicles (UAVs). The launch of SORA 200 follows Cepton’s recent unveiling of its HR80 series of high-performance 3D LiDAR products for ground applications.

Cepton is partnering with LiDAR USA, a total LiDAR geospatial solutions company, to bring SORA 200 to market. LiDAR USA is Cepton’s first reseller and system integrator in the UAV mapping industry.

“To meet the increasing demands of UAVs, LiDAR sensors must be long-range, lightweight and high-resolution,” said Dr. Mark McCord, co-founder and VP of engineering at Cepton. “SORA 200 allows for highly efficient 3D map data production at increased altitudes and velocities in various environments. With 200-meter range and a weight of just 550 grams, SORA 200 is the lightest high-performance UAV LiDAR on the market today. We are thrilled to partner with LiDAR USA on this product to bring a new solution to the UAV mapping industry.”

Cepton’s micro-motion LiDAR technology removes expensive, ungainly spinning parts common in traditional LiDAR units, resulting in smaller and more reliable sensors that do not compromise on resolution or range. Use of off-the-shelf materials reduces delivery wait time and overall cost.

“For years, the UAV mapping industry has been waiting for a long-range, lightweight and low-cost 3D LiDAR solution,” said Jeff Fagerman, CEO of LiDAR USA. “No one has been able to produce anything like SORA 200. We are very excited that Cepton is fulfilling this market need.”

Product highlights include:

  • Lightweight: At 550 grams, the SORA 200 can be deployed in situations where payload weight matters. Its light weight means that UAVs enabled with SORA 200 can fly for longer trips.
  • Long-range: With its scanning range extending up to 200 meters, the SORA 200 allows UAVs to fly at higher altitudes and cover more ground.
  • High-frame rate: With a 200-hertz frame rate, UAVs equipped with the SORA 200 can operate faster while maintaining high-density map data acquisition.

Cepton and LiDAR USA will present SORA 200’s mapping capabilities at the Commercial UAV Expo in Las Vegas, NV, from October 25-26, at booth #610. Cepton will also present at the event on Tuesday, October 24 at 4:15 p.m. in Pavilion 9-11, as part of the Product Preview Presentations.

About Cepton

Cepton is a 3D sensing solutions provider that is shipping next generation LiDAR products for the automotive, industrial and mapping markets. Cepton’s LiDAR technology delivers unrivaled performance and resolution at low cost, to enable perception for the smart machines of tomorrow. For more information, visit http://www.cepton.com/.

About LiDAR USA

LiDAR USA, a Fagerman Technologies, Inc. geospatial solutions company, is committed to bringing fast, accurate, high-resolution LiDAR solutions to the UAV market. See  http://www.lidarusa.com/ for more details.



Contact:

Antenna Group for Cepton
Sean Lenehan, +1 415-977-1918
Email Contact

Featured Video
Editorial
Jobs
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Engineer 2 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise