ESD Alliance Reports EDA Industry Revenue Increase For Q4 2017

REDWOOD CITY, Calif., April 4, 2018 — (PRNewswire) —  The Electronic System Design (ESD) Alliance Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 10.7 percent for Q4 2017 to $2718.6 million, compared to $2455 million in Q4 2016. The four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 9.5 percent.

"The EDA industry reported increases in all product categories in Q4, with double digit increases in CAE, IC Physical Design & Verification, and Semiconductor IP." said Walden C. Rhines, board sponsor for the ESD Alliance MSS and president and CEO of Mentor, a Siemens business. "This represents eight consecutive years of industry growth. Geographically, the Americas and Asia-Pacific reported double-digit growth in 2017."

Companies that were tracked employed 39,363 professionals in Q4 2017, an increase of 9.8 percent compared to the 36,412 employed in Q4 2016, and up 2.4 percent compared to Q3 2017.

The complete quarterly MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available to members of the ESD Alliance.

Revenue by Product Category
Computer Aided Engineering (CAE), generated revenue of $848.1 million in Q4 2017, which represents a 12 percent increase compared to Q4 2016. The four-quarters moving average for CAE increased 7.8 percent.

IC Physical Design & Verification revenue was $549.8 million in Q4 2017, an 11 percent increase compared to Q4 2016. The four-quarters moving average increased 6.0 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $241.1 million for Q4 2017 represents an increase of 2.4 percent compared to Q4 2016. The four-quarters moving average for PCB & MCM increased 8.1 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $961.5 million in Q4 2017, a 12.3 percent increase compared to Q4 2016. The four-quarters moving average increased 14.4 percent.

Services revenue was $118.1 million in Q4 2017, an increase of 7.2 percent compared to Q4 2016. The four-quarters moving average increased 3 percent.

Revenue by Region
The Americas, EDA's largest region, purchased $1252.8 million of EDA products and services in Q4 2017, an increase of 19.5 percent compared to Q4 2016. The four-quarters moving average for the Americas increased 10.9 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) decreased 0.9 percent in Q4 2017 compared to Q4 2016 on revenues of $386.3 million. The EMEA four-quarters moving average increased 4.6 percent.

Fourth quarter 2017 revenue from Japan increased 0.5 percent to $228.9 million compared to Q4 2016. The four-quarters moving average for Japan increased 3.2 percent.

The Asia/Pacific (APAC) region revenue increased to $850.7 million in Q4 2017, an increase of 7.8 percent compared to the fourth quarter of 2016. The four-quarters moving average increased 12 percent.

The complete MSS report, available to the ESD Alliance members, contains additional detail for countries in the Asia/Pacific region.

About the MSS Report
The ESD Alliance Market Statistics Service reports EDA industry revenue data quarterly and is available to Alliance members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the Electronic System Design Alliance
The Electronic System Design (ESD) Alliance, an international association of companies providing goods and services throughout the semiconductor design ecosystem, is a forum to address technical, marketing, economic and legislative issues affecting the entire industry. It acts as the central voice to communicate and promote the value of the semiconductor design industry as a vital component of the global electronics industry. For more information about the ESD Alliance, visit http://esd-alliance.org.

The information supplied by the ESD Alliance is believed to be accurate and reliable, but the ESD Alliance assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.

Press Contacts:                                                                                                   

Paul Cohen, ESD Alliance, 978-769-2106
Suzanne Graham, Mentor, a Siemens business, 503-685-7789                    

 

Cision View original content: http://www.prnewswire.com/news-releases/esd-alliance-reports-eda-industry-revenue-increase-for-q4-2017-300624032.html

SOURCE Electronic System Design (ESD) Alliance

Contact:
Company Name: Electronic System Design (ESD) Alliance
Web: http://www.esd-alliance.org

Featured Video
Editorial
Jobs
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Mechanical Engineer 2 for Lam Research at Fremont, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Equipment Engineer, Raxium for Google at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise