The SV4E-DPTXCPTX Transmit Device Emulator enables multi-protocol display device programming, debugging, and optimization
SAN JOSE, Calif., May 15, 2019 — (PRNewswire) —SAN JOSE, Calif., May 15, 2019 /PRNewswire-PRWeb/ -- Introspect Technology, leading manufacturer of test and measurement tools for high-speed digital applications, today announced it released the industry's first dual-mode MIPI® Alliance D-PHY�nbsp;/ C-PHY�nbsp; display driver integrated circuit (IC) and display panel tester. Introspect's SV4E-DPTXCPTX MIPI Transmit Device Emulator is a highly integrated system-level tester that facilitates the rapid screening, calibration, and optimization of MIPI enabled devices. Optimized for display driver and module test applications, the SV4E-DPTXCPTX's unique dual-mode physical layer enables multi-protocol design verification and high-volume manufacturing test.
Increasing Complexities for Testing Display-Intensive Products
The various technological advances aimed at producing feature-rich, power-efficient, and higher quality displays have made it increasingly difficult to design and test display-intensive products. The increased complexity of display devices means that design and test engineers must consider many operating scenarios when creating test setups. In addition, with all the various and complex functions display systems perform today, it is imperative that testing methodologies inspect display devices for deficiencies that occur in real-world situations.
Despite the emerging complexities in testing, the SV4E-DPTXCPTX's unique dual-mode D-PHY/C-PHY analog front-end not only allows engineers to perform multi-protocol validation, but its excellent signal integrity and robust reliability also allow design and test engineers to easily create a realistic test setup where the device is run as close as possible to the end-user experience. The tester can function as a highly adaptable applications processor, providing complete on-the-fly control for debugging power-on sequences, reset sequences, and tuning algorithms for advanced AMOLED, OLED, or LCD panels. This makes it a critical time-to-market tool for display driver IC makers who can start to develop their ICs without depending on the existence of off-the-shelf vendor processors.
To display driver IC makers, the SV4E-DPTXCPTX provides a complete, standalone tool for tuning and optimizing displays, offering firmware and software engineers the ability to generate video at any resolution and at any refresh rate or variable refresh rate (VRR). It also allows firmware engineers to program all their device registers through the MIPI DSI-2�nbsp; read/write interface and to exercise all aspects of their design that include: high resolution video generation, command-mode, and video-mode display driver timing control, color correction algorithms, brightness (or ultra-high brightness) algorithms, ultra-high refresh rate solutions, and power optimization algorithms.
Once display driver ICs are integrated into module assemblies, the SV4E-DPTXCPTX represents a complete system-level stimulus solution that can be integrated into entire module test stations used for rapid screening, reliability testing, and optimization of display panels during production. It has fully automated software that can be deployed to assist in color correction, calibration, or other steps that are included in a typical panel manufacturing flow.
All of the above features of the SV4E-DPTXCPTX boil down to a faster time to market and a higher quality, better optimized display solution in a highly competitive display market. Indeed, this latest tester from Introspect Technology affirms the company's commitment to enhancing its customers' productivity and quality.
SV4E-DPTXCPTX Technical Features
- Dual-mode D-PHY and C-PHY physical layer
- Multi-protocol support for DSI�nbsp; v1.3, DSI-2 v1.0, DSI-2 v1.1 and next-generation protocols
- Very high speed (4.5 Gbps on D-PHY and 2.5 Gsps on C-PHY)
- Support for Display Stream Compression (DSC) and VDC-M compression, which is the next generation compression standard for mobile phones
- Support for all MIPI read and write operations
- Extensive video generation capability including streaming long video sequences
- Any clock rate, any refresh rate, and variable refresh rate operation
- Up to six device power supplies with current measurement capability, thus making it a complete solution that not only tests a panel but also provides power supplies to it
The SV4E-DPTXCPTX MIPI Transmit Device Emulator is now available for purchase from Introspect Technology or through one of its approved worldwide distributors.
About Introspect
Introspect Technology designs and manufactures innovative test and measurement tools for high-speed digital applications. Whether it is the next smartphone or level-4 autonomy engine in a high-end car, our tools are used to help develop, test, and manufacture next-generation products. In other words, we help the leading semiconductor, automotive, and telecommunications companies make tomorrow's technology today's possibility.
SOURCE Introspect Technology
Contact: |
Company Name: Introspect Technology
Web: https://introspect.ca/ |