OGC seeks to modernize its Observations & Measurements standards: public comment is sought on new scope of work

Newly revised O&M SWG will update the existing O&M standards to conform to modern web architecture requirements and best practice, and create a new OGC standard for JSON encoding of O&M data.

28 August 2019: The Open Geospatial Consortium (OGC) requests public comment on the recharter of the OGC Observations and Measurements (O&M) Standards Working Group (SWG). 

OGC members have proposed a revision of the SWG Charter to reflect the group’s modified scope of work: to update the existing O&M standards to conform to modern web architecture requirements and best practice, and create a new OGC standard for JSON encoding of O&M data.

The O&M standard was originally defined within the OGC Sensor Web Enablement Initiative in 2003-2007. Version 2.0 of the standard was co-published as the  OGC Abstract Specification Topic 20 and ISO 19156:2011. The latest version of OGC Abstract Specification Topic 20 is from 2013. As such, the standard requires revising to accommodate technical issues discovered in various standard implementations and harmonization with recent W3C/OGC standardization work on sensor network terminology and concepts defined in the  Semantic Sensor Network (SSN) and Sensor, Observation, Sample, and Actuator (SOSA) ontologies. The ISO 19156 revision will be carried out by the ISO/TC 211 in parallel, and in close co-operation with the O&M SWG revision work on the OGC O&M encoding Standards.

Standards-based exchange of observed, measured, or modeled data are key enablers for many critical online consumer and governmental services. Examples of these data sets include: weather, air quality, and other kinds of environmental observations and forecasts; traffic monitoring data; health monitoring; building and construction safety measurements; various remote sensing data; and industrial process monitoring. The  Observations and Measurements family of Standards defines a conceptual level data model as well as encodings for these datasets.

The OGC Observations and Measurements - XML Implementation (OGC 10-025r1) Standard defines an XML encoding for the concepts defined in OGC Abstract Specification Topic 20 and will also be revised to accommodate the changes to the OGC Observations and Measurements Abstract Specification.

Notably, and in addition to the revision of the O&M XML Implementation Standard, there is an identified need to standardize an O&M data encoding for formats like JSON/GeoJSON. These formats are preferred in modern Web APIs, including those conforming to the  OGC API - Features - Part 1: Core Draft Standard (OGC 17-069r2).

Both the Observations and Measurements conceptual data model and its standardized XML encoding are used extensively in Spatial Data Infrastructures such as in the  EU INSPIRE. There is also on-going work to additionally provide INSPIRE O&M datasets in JSON/GeoJSON based formats, but no standard has yet been identified describing an interoperable way of doing this.

The new Observations and Measurements Standards Working Group draft charter is available for review and comment on the  OGC Portal. Comments are due by the 27th of September 2019 and should be submitted via the method outlined on the  Observations and Measurements Standards Working Group recharter request page.

About OGC

The Open Geospatial Consortium (OGC) is an international consortium of more than 530 businesses, government agencies, research organizations, and universities driven to make geospatial (location) information and services FAIR - Findable, Accessible, Interoperable, and Reusable.

OGC’s member-driven consensus process creates royalty free, publicly available geospatial standards. Existing at the cutting edge, OGC actively analyzes and anticipates emerging tech trends, and runs an agile, collaborative Research and Development (R&D) lab that builds and tests innovative prototype solutions to members' use cases.

OGC members together form a global forum of experts and communities that use location to connect people with technology and improve decision-making at all levels. OGC is committed to creating a sustainable future for us, our children, and future generations.

Visit  ogc.org for more info on our work.



Contact:

Email Contact 

Featured Video
Editorial
Jobs
Mechanical Engineer 3 for Lam Research at Fremont, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 2 for Lam Research at Fremont, California
Equipment Engineer, Raxium for Google at Fremont, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise