WSSA Asks: Is Unmanned Aerial Weed Control Ready for Takeoff?

Unmanned aerial vehicles (UAVs), commonly referred to as drones, may soon revolutionize weed management. Equipped with the right tools, researchers say they can be quite effective at both finding and treating problem weeds.

WESTMINSTER, Colo., Sept. 10, 2019 — (PRNewswire) —

WESTMINSTER, Colo., Sept. 10, 2019 /PRNewswire-PRWeb/ -- Scientists with the Weed Science Society of America (WSSA) say unmanned aerial vehicles (UAVs) may soon revolutionize weed management. And it's easy to see why.

UAVs, often referred to as drones, can travel where it is hard to navigate by ground – from flying over dense forests to hovering over lakes, streams and other bodies of water. And when equipped with the right tools, researchers say they can be quite effective at both finding and treating problem weeds.

Just consider the following findings from John Nowatzki, a scientist at North Dakota State University:

  •     Weed Identification and Mapping

UAVs equipped with cameras and other sensor technologies have successfully measured weed density and have been used to identify and map multiple weed species with greater than 90 percent accuracy. They also have been used to detect differences in canopy temperatures between glyphosate-susceptible and glyphosate-resistant weed species – data used to identify resistant weeds with an accuracy level of more than 95 percent.

One downside: Analyzing data collected by UAVs takes time, and that can mean a costly delay in weed management decisions. Researchers say artificial intelligence tools can eliminate the lag as computers learn to identify and map weeds on the go. More work must be done, though, to develop the massive databases of weed images needed for machine learning.

  •     Aerial Application of Herbicides

Researchers are currently testing a semi-autonomous UAV spray system guided by global positioning system (GPS) coordinates fed into the UAV's flight planner. They've found that UAVs can hover over targeted treatment areas with an accuracy of one to two feet – improving the precision and safety of herbicide applications.

Before such systems become widely used in agriculture, though, researchers say it is important to learn more about spray drift patterns, the impact of droplet size, and the environmental and health impacts of UAV-based herbicide applications. Such information will be critical to the U.S. Environmental Protection Agency (EPA) as it works to establish policies that will address acceptable UAV use patterns, herbicide labeling, and regulatory, safety and enforcement issues.

But those investigating UAVs as a tool for weed control are upbeat about the potential. With the appropriate computer processing capacity and battery power, UAVs may one day become fully autonomous – able to identify weeds and make site-specific herbicide applications in real-time, all as part of a sustainable, site-specific weed management system.

"It's easy to imagine early response programs to spot-treat potentially resistant weeds that escaped a previous treatment," says Muthu Bagavathiannan, Ph.D., of Texas A&M University. "Doing so could greatly improve weed control and minimize weed seedbank replenishment, while reducing the amount of herbicides used."

UAVs for Aquatic Weed Management

Aquatic weed management is an area where UAVs can really shine. Weed mapping is crucial to assessing the risk of plant invaders that threaten vital water resources. But it can be a tough task to accomplish by boat or shoreline observations.

According to Rob Richardson, Ph.D., of North Carolina State University, UAVs equipped with high-resolution cameras can quickly travel over bodies of water to detect new weed infestations, estimate the biomass of submersed or floating weed beds, and monitor weeds before and after treatment.

"UAVs give us a timely, low-cost way to reach areas of a waterway that would otherwise be inaccessible by boat due to shallow water, lack of launch facilities, or the presence of stumps, rocks or other hazards," Richardson said. "They can be an important tool for rapid response and for making better-informed weed management decisions."

UAVs can also be used to apply treatments to specific areas over broad swaths of weedy invaders, Richardson says. Research is underway to explore important aquatic treatment variables – from the most appropriate applicator nozzles to best practices for managing spray drift.

Regulatory Controls

UAVs used in agriculture must be registered with the Federal Aviation Administration (FAA). The FAA also offers a certification process for operators. Details can be found on the FAA's website, specifically at Parts 107 and 137 of its small, unmanned aircraft regulations.

About the Weed Science Society of America

The Weed Science Society of America, a nonprofit scientific society, was founded in 1956 to encourage and promote the development of knowledge concerning weeds and their impact on the environment. The Society promotes research, education and extension outreach activities related to weeds, provides science-based information to the public and policy makers, fosters awareness of weeds and their impact on managed and natural ecosystems, and promotes cooperation among weed science organizations across the nation and around the world. For more information, visit http://www.wssa.net.

NOTE TO EDITORS: Supporting photos are available for download from the WSSA website at http://wssa.net/wssa-photo-link. Simply right click and save.

 

SOURCE WSSA

Contact:
Company Name: WSSA
Web: http://www.wssa.net

Featured Video
Editorial
Jobs
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Equipment Engineer, Raxium for Google at Fremont, California
Mechanical Engineer 2 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise