Cadence Reports Second Quarter 2020 Financial Results

SAN JOSE, Calif. — (BUSINESS WIRE) — July 20, 2020 — Cadence Design Systems, Inc. (Nasdaq: CDNS) today announced results for the second quarter of 2020.

Cadence reported second quarter 2020 revenue of $638 million, compared to revenue of $580 million reported for the same period in 2019. On a GAAP basis, Cadence achieved operating margin of 24 percent and recognized net income of $131 million, or $0.47 per share on a diluted basis, in the second quarter of 2020, compared to operating margin of 23 percent and net income of $107 million, or $0.38 per share on a diluted basis, for the same period in 2019.

Using the non-GAAP measure defined below, operating margin for the second quarter of 2020 was 35 percent and net income was $185 million, or $0.66 per share on a diluted basis, compared to operating margin of 34 percent and net income of $161 million, or $0.57 per share on a diluted basis, for the same period in 2019.

“Cadence has adapted well to the difficult environment, continuing to innovate and delight customers, while delivering outstanding results for shareholders,” said Lip-Bu Tan, chief executive officer. “While these are uncertain times, design activity remains strong and our Intelligent System Design strategy has us well positioned to take advantage of these opportunities. To ensure business continuity, we are further investing in infrastructure and collaboration platforms to maintain high levels of productivity and innovation.”

“Cadence exceeded all of its key financial metrics for the second quarter and we are raising our outlook for the year to 11% revenue growth and 33% non-GAAP operating margin,” said John Wall, senior vice president and chief financial officer. “Cadence operated from approximately 50 sites across the globe before the pandemic, and we are now operating from a distributed network of more than 8,000 homes. We are blessed to have such a strong and versatile global leadership group. I am very impressed and thankful for how our team is not only rising to the challenge but thriving in this environment.”

CFO Commentary

Commentary on the second quarter 2020 financial results by John Wall, senior vice president and chief financial officer, is available at www.cadence.com/cadence/investor_relations.

Business Outlook

For the third quarter of 2020, the company expects total revenue in the range of $630 million to $650 million. Third quarter GAAP operating margin is expected to be approximately 22 percent and GAAP net income per diluted share is expected to be in the range of $0.49 to $0.51. Using the non-GAAP measure defined below, operating margin is expected to be approximately 32 percent and net income per diluted share is expected to be in the range of $0.59 to $0.61.

For 2020, the company expects total revenue in the range of $2.585 billion to $2.615 billion. On a GAAP basis, operating margin is expected to be approximately 22 percent and GAAP net income per diluted share for 2020 is expected to be in the range of $1.84 to $1.90. Using the non-GAAP measure defined below, operating margin for 2020 is expected to be approximately 33 percent and net income per diluted share for 2020 is expected to be in the range of $2.50 to $2.56.

A schedule showing a reconciliation of the business outlook from GAAP operating margin, GAAP net income and diluted net income per share to non-GAAP operating margin and non-GAAP net income and diluted net income per share is included in this release.

Audio Webcast Scheduled

Lip-Bu Tan, chief executive officer, and John Wall, senior vice president and chief financial officer, will host the second quarter 2020 financial results audio webcast today, July 20, 2020, at 2 p.m. (Pacific) / 5 p.m. (Eastern). Attendees are asked to register at the website at least 10 minutes prior to the scheduled webcast. An archive of the webcast will be available starting July 20, 2020 at 5 p.m. (Pacific) and ending September 11, 2020 at 5 p.m. (Pacific). Webcast access is available at www.cadence.com/cadence/investor_relations.

About Cadence

Cadence is a pivotal leader in electronic design, building upon more than 30 years of computational software expertise. The company applies its underlying Intelligent System Design strategy to deliver software, hardware and IP that turn design concepts into reality. Cadence customers are the world’s most innovative companies, delivering extraordinary electronic products from chips to boards to systems for the most dynamic market applications including consumer, hyperscale computing, 5G communications, automotive, aerospace, industrial and health. For six years in a row, Fortune Magazine has named Cadence one of the 100 Best Companies to Work For. Learn more at cadence.com.

© 2020 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo and the other Cadence marks found at www.cadence.com/go/trademarks are trademarks or registered trademarks of Cadence Design Systems, Inc. All other trademarks are the property of their respective owners.

This document includes forward-looking statements which are based on current expectations and preliminary assumptions that are subject to factors and uncertainties that could cause actual results to differ materially from those described in the forward-looking statements. These forward-looking statements are subject to a number of risks, uncertainties and other factors, many of which are outside Cadence’s control, including, among others: (i) Cadence’s ability to compete successfully in the highly competitive industries in which it operates; (ii) the success of Cadence’s efforts to maintain and improve operational efficiency and growth; (iii) the mix of products and services sold, the timing of orders and the ability to develop, install or deliver Cadence’s products or services; (iv) change in customer demands that could result in delays in purchases, development, installations or deliveries of Cadence's products or services, including those resulting from consolidation, restructurings and other operational efficiency improvements of Cadence’s customers; (v) economic and industry conditions, including that of the semiconductor and electronics industries, government regulations and trade restrictions; (vi) capital expenditure requirements, legislative or regulatory requirements, changes in tax laws, interest rates, currency exchange rate fluctuations and Cadence’s ability to access capital and debt markets; (vii) the acquisition of other companies or technologies or the failure to successfully integrate and operate them; (viii) events that affect cash flow, liquidity, or reserves, or settlement assumptions Cadence may take from time to time with respect to accounts receivable, taxes and tax examinations, litigation or other matters; (ix) the effects of any litigation or other proceedings to which Cadence is or may become a party; and (x) the duration, severity and effects of the COVID-19 pandemic and containment measures on Cadence, its employees, and its suppliers and customers, which may also have the effect of heightening the other risks described in this paragraph. In addition, the timing and amount of Cadence's repurchase of its common stock under the authorizations will be subject to business and market conditions, corporate and regulatory requirements, stock price, acquisition opportunities and other factors.

For a detailed discussion of these and other cautionary statements related to Cadence’s business, please refer to Cadence’s filings with the U.S. Securities and Exchange Commission, which include Cadence’s most recent reports on Form 10-K and Form 10-Q, including Cadence’s future filings.

GAAP to Non-GAAP Reconciliation

Non-GAAP financial measures should not be considered as a substitute for or superior to measures of financial performance prepared in accordance with generally accepted accounting principles, or GAAP. Investors are encouraged to review the reconciliation of non-GAAP financial measures contained within this press release with their most directly comparable GAAP financial results. Investors are also encouraged to look at the GAAP results as the best measure of financial performance.

To supplement Cadence’s financial results presented on a GAAP basis, Cadence management uses non-GAAP measures that it believes are helpful in understanding Cadence’s performance. One such measure is non-GAAP net income, which is a financial measure not calculated under GAAP. Non-GAAP net income is calculated by Cadence management by taking GAAP net income and excluding, as applicable, amortization of intangible assets, stock-based compensation expense, acquisition and integration-related costs including retention expenses, investment gains or losses, income or expenses related to Cadence’s non-qualified deferred compensation plan, restructuring, executive severance and other significant items not directly related to Cadence’s core business operations, and the income tax effect of non-GAAP pre-tax adjustments.

1 | 2 | 3 | 4  Next Page »
Featured Video
Editorial
Jobs
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Mechanical Engineer 2 for Lam Research at Fremont, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Equipment Engineer, Raxium for Google at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise