New Applications From LiquidPiston Enable Aircraft Electrification To Improve Drone and Rotorcraft Flight Duration and Fuel Efficiency

Using the company’s innovative X-Engine, LiquidPiston is working with the U.S. Army and its xTechSearch small business technology competition to develop new UAV propulsion and aircraft auxiliary power systems

BLOOMFIELD, Conn. — (BUSINESS WIRE) — September 15, 2020 — “This SBIR award and xTechSearch 3.0 innovation competition showcases the Army’s interest in innovative, fuel-efficient power sources to deliver the power needed to support Future Vertical Lift (FVL) Modernization Priorities,” said Alec Shkolnik, CEO and co-founder of LiquidPiston. “When we reimagined the rotary engine with the X-Engine, we knew it could be used to improve power generation in a number of different ways, given its high power-to-weight, efficiency, and ability to run on heavy fuel including Jet-A / JP8 fuel which the Army wants to use exclusively. The versatility of LiquidPiston’s X-Engine enables the company to provide hybrid-electric power generation in various form factors, which makes it uniquely suited to serve not just FVL, but all 6 of the Army’s modernization priorities.”

The X-Engine, a rotary engine that operates on the company’s patented High-Efficiency Hybrid Cycle (HEHC), is the perfect power source for a hybrid-electric propulsion platform because of its compact size and fuel efficiency. UAVs with Vertical Take Off and Landing (VTOL) capabilities enable the Army to launch and land UAVs on a small area and set up and stow quickly while the X-Engine hybrid-electric power system allows minimization of heavy, low energy density onboard batteries. The X-Engine, configured as a parallel electric hybrid, also provides UAVs with the unique ability to cruise in “quiet mode” using electric-only power, with the ability to restart the engine mid-flight, enabling more efficient fuel usage and stealthier missions. The ability to do this on jet fuel has not previously been demonstrated in other vehicles currently fielded.

The flexibility of the X-Engine can further be seen with the company’s development of various APU concepts for Army aircraft and land vehicles. The company entered into the xTechSearch competition with a high-efficiency aviation APU concept for rotorcraft. The proposed unit is compact, highly-efficient, and can perform the typical on-ground APU functions but also functions in-flight to offload the main engines in providing supplementary power for hydraulics, heating and cooling, and addresses the increasing power demands of the onboard electronics, weapons and other equipment. In APU applications, the X-Engine approaches the power density and packaging similar to a turbine-based APU, with the efficiency of a Diesel engine. Today’s APU’s are only 5-10% efficient, making them useful for only short periods on the ground. The LiquidPiston APU would offer substantial gains in power and efficiency and offload the main engines, allowing a helicopter substantial gains in range, or adding a passenger or other payload capability.

The X-Engine, when matured and deployed, will help to provide the increasing power requirements for direct and hybrid electric propulsion for the US Army Future Tactical UAS (FTUAS) and other DoD UAS programs as well as Auxiliary Power Units (APUs), Supplemental Power Units (SPUs) and Power & Thermal Management Systems (PTMS) for manned rotorcraft and fixed wing aircraft.

Dr. William Cohen, Chief Technology Officer of the U.S. Army Assistant Secretary of the Army (Acquisition, Logistics and Technology) i.e. ASA(ALT), said “Advanced power generation and alternative fuels are critical for the Army, and we continuously seek new technologies that can materially improve our ability to execute national security missions. Reliable engine technologies that offer a wide range of sustainable applications, from UAVs to auxiliary power units for air and land vehicles, can increase endurance and lessen reliance on contested or extended supply lines. Potential benefits include increased reliability and access to power, increased redundancy within the power distribution network, reduced logistics footprint associated with fuel distribution, and extended operational reach.”

To learn more about these developments, LiquidPiston’s X-Engine, and participation in the Army xTechSeach click here. For media assets click here.

The xTechSearch, or Expeditionary Technology Search competition, was first launched in June 2018 by the United States Assistant Secretary of the Army for Acquisition, Logistics, and Technology (ASA(ALT)), which serves as the Army Acquisition Executive. The competition is a four-phase catalyst for the Army to engage with the community of innovators such as LiquidPiston.

About LiquidPiston, Inc.

LiquidPiston, Inc. develops compact, quiet, fuel-efficient, low-vibration, multi-fuel capable combustion engines that are scalable from one horsepower to over 1,000. The company’s patented High Efficiency Hybrid Cycle (HEHC), an improved thermodynamic cycle, and engine architecture enable the company to create engines optimized for fuel efficiency. LiquidPiston’s engines have only two primary moving parts - a shaft and rotor - resulting in compact size and low-vibration operation. Although they are rotary engines, LiquidPiston’s engines are not Wankel engines; they are uniquely configured to adopt the company’s patented thermodynamic cycle and its associated efficiency and low-noise benefits. To learn more, visit www.liquidpiston.com.



Contact:

Media Contact
Chelsea Higgins
BIGfish Communications for LiquidPiston
liquidpiston@bigfishpr.com

Featured Video
Editorial
Jobs
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 2 for Lam Research at Fremont, California
Equipment Engineer, Raxium for Google at Fremont, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise