Geospatial Holdings Smart Probe/DuctRunner Technology Utilized on Dubai’s Palm Islands

PITTSBURGH — (BUSINESS WIRE) — May 5, 2009 Geospatial Holdings, Inc. (OTCBB: GSPH) today announced that its Smart Probe/DuctRunner Pipeline Mapping Technology was utilized to enable a unique installation via horizontal directional drilling (HDD) of several pipeline segments on Dubai’s Palm Islands. The project was completed by Al Naboodah Specialist, LLC a part of the local Al Naboodah Group of Companies and supervised by Reduct NV, licensor of the DuctRunner technology.

The project included the installation of over 32,800 feet of 20-inch diameter HDPE pipeline. To install this pipeline under the ocean floor the design called for 17-degree entry and exit angles and 1,310 foot radius entry and exist curves. At the deepest point the bore would be 89 feet below the surface.

To enable the exact placement of these pipelines the first task was to sink a 6 inch steel pipe on the seabed and determine its exact x, y & z co-ordinates. To accomplish this, a Smart Probe/DuctRunner was run through the pipeline to create a 3-D map of the centerline of the pipe. With the exact centerline of the pipe in hand, a wire was run through the pipeline and returned back along the ocean floor to the point of beginning. This wire was then energized, and the signal tracked by a Paratrack horizontal directional drilling guidance unit to accurately guide the drilling of the pilot bores for the pipeline installation.

For an overview of the installation please go to http://www.geospatialcorporation.com/hdd/HDDSteeringApplication.ppt.

Additional information can be found in an article on the Trenchless Technology Magazine website: http://www.trenchlessonline.com/index/webapp-stories-action?id=746

Mark Smith, Geospatial’s CEO stated, “While not involved directly with this very successful installation in Dubai, Geospatial is excited about utilizing its Smart Probe technology in this unique application. Horizontal Directional Drilling is the fastest growing method of installing pipelines throughout the world. By providing an economical and accurate method of guiding HDD installations along with the ability to accurately map the installed pipeline, our Smart Probe Technologies should be specified by every engineer and pipeline owner utilizing HDD methods.”

ABOUT GEOSPATIAL

Based in Pittsburgh, Pennsylvania, Geospatial operates globally as an innovative solutions provider of proprietary technologies that permit the accurate mapping and interior geometry assessments of underground pipelines and all types of above ground infrastructure. Geospatial’s technologies permit the Company to economically collect, store and retrieve XYZ mapping coordinates of a pipeline centerline to create three-dimensional Geographic Information System (GIS) databases. Geospatial is the exclusive licensee of the DuctRunner Smart Probe™ Pipeline Mapping Technology throughout North America, South America and Australia.

Geospatial has also developed Geo-Underground, a Web-Based “Software as a Service” GIS Portal which allows municipalities and pipeline operators worldwide to manage their above and below ground infrastructure assets via the web without the need for expensive software, hardware or dedicated GIS technicians.

Additional information on Geospatial can be found on our website at www.geospatialcorporation.com.

Forward-Looking Statements

The Private Securities Litigation Reform Act of 1995 provides a “safe harbor” for forward-looking statements. The Company makes forward-looking statements in this news release that represent the Company’s beliefs or expectations about future events or financial performance. These forward-looking statements are based on information currently available to the Company and on management’s beliefs, assumptions, estimates and projections and are not guarantees of future events or results. When used in this document, the words “anticipate,” “estimate,” “believe,” “plan,” “intend,” “may,” “will” and similar expressions are intended to identify forward-looking statements, but are not the exclusive means of identifying such statements. Such statements are subject to known and unknown risks, uncertainties and assumptions, including those referred to in the “Risk Factors” section of the Company’s Annual Report on Form 10-K for the year ended December 31, 2008, as filed with the Securities and Exchange Commission (the “Commission”) and in the “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” sections of the Company’s Report on Form 8-K filed with the Commission. In light of these risks, uncertainties and assumptions, the forward-looking events discussed may not occur. In addition, our actual results may vary materially from those anticipated, estimated, suggested or projected. Except as required by law, we do not assume a duty to update forward-looking statements, whether as a result of new information, future events or otherwise. Investors should, however, review additional disclosures made by the Company from time to time in its periodic filings with the Securities and Exchange Commission. Please use caution and do not place reliance on forward-looking statements. All forward-looking statements made by the Company in this news release are qualified by these cautionary statements.



Contact:

Geospatial Holdings, Inc.
Mark A. Smith, 724-353-3400
Chief Executive Officer
Email Contact

Featured Video
Editorial
Jobs
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 2 for Lam Research at Fremont, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise