Boeing Provides First Look at 787 Stall Tests

EVERETT, Wash., Jan. 29 — (PRNewswire) — Boeing (NYSE: BA) 787 Dreamliner pilots conducted the program's first stall tests – in which pilots intentionally reduce power to both engines and then recover normal flight speeds – as part of the initial airworthiness program for the airplane. Additional stall tests will take place throughout the flight test period.

The testing went "very well and there were no surprises," said 787 Chief Pilot Mike Carriker.

The purpose of the testing is to demonstrate that in the rare event a pilot encounters a stall during flight, the airplane reacts benignly and allows for a smooth recovery. A stall is defined as flying so slowly that the airplane is no longer generating lift.

During stall maneuvers pilots use a disciplined process to slow the airplane down at precise increments to the point where it shakes dramatically, resulting in forces of 1.5 times the force of gravity.

Video highlights and an interview with Carriker are featured in a three-minute video on a new 787 flight test Web site that is being launched today. The site can be accessed at either www.boeing.com or www.newairplane.com.

To receive updates on the 787 flight test program, go to the Web site and click on the RSS feed icon in the right column, near the top of the site.

Contact:

Lori Gunter

787 Communications

+1 206-931-5919

SOURCE Boeing

Contact:
Boeing
Lori Gunter of 787 Communications, Boeing
Phone: +1-206-931-5919
Web: http://www.boeing.com

Featured Video
Editorial
Jobs
Mechanical Engineer 3 for Lam Research at Fremont, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Equipment Engineer, Raxium for Google at Fremont, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise