Dassault Falcon 900LX Flight Test Program Enters Into its Last Phase; Begins Completions on First Customer Aircraft

GENEVA, May 3, 2010 — (PRNewswire) — Dassault's Falcon 900LX has entered the last phases of the flight test and certification program while completions on the first two customer aircraft have begun. Final certification is anticipated during the third quarter of 2010 with deliveries starting thereafter.

(Photo: http://www.newscom.com/cgi-bin/prnh/20100503/389654-a )

(Photo: http://www.newscom.com/cgi-bin/prnh/20100503/389654-b )

The flight test program, which began in October of 2009, has accumulated 180 flight hours over 72 flights. Handling qualities of the airplane, take-off and landing performance, stalls at various speed configurations, flights in icing conditions, maximum operating speed, as well as simulated system failures have been tested extensively in addition to aircraft fuel consumption. The aircraft performed as expected and confirmed reductions in drag and higher climb performance over the Falcon 900EX EASy which it will replace.

More than half of the certification flights have been performed to date with EASA certification pilots. Crosswind trials are planned in the next few weeks.

The 4,750 nm Falcon 900LX is built on the Falcon 900EX EASy platform and includes a pair of High-Mach Blended Winglets designed by Aviation Partners Inc. The wing aerodynamic improvement will help reduce aircraft drag as much as 5% offering corresponding range and efficiency improvements. Time to climb to cruise altitude will also be reduced by 10%. As a consequence, the Falcon 900LX is as much as 50% to 60% more efficient than other airplanes in its class.

"Our thorough flight test program has demonstrated the improved efficiencies of the Falcon 900LX," said John Rosanvallon, President and CEO of Dassault Falcon. "Falcon 900LX operators will be confident in the fact that they operate the most efficient airplane in its class. It burns less fuel and creates fewer emissions. That's a very positive message in today's closely scrutinized business world."

The Falcon 900LX can connect a wide variety of commonly used cities, including New York with Moscow, Paris with Beijing, Washington with Sao Paulo, Dubai with Tokyo and Caracas with Geneva.

About Dassault Falcon

Dassault Falcon is responsible for selling and supporting Falcon business jets throughout the world. It is part of Dassault Aviation, a leading aerospace company with a presence in over 70 countries across 5 continents. Dassault Aviation produces the Rafale fighter jet as well as a complete line of Falcon business jets. The company has assembly and production plants in both France and the United States and service facilities on multiple continents. It employs a total workforce of over 12,000. Since the rollout of the first Falcon 20 in 1963, 2000 Falcon jets have been delivered to more than 67 countries worldwide. The family of Falcon jets currently in production includes three tri-jets-the Falcon 900DX, 900LX and the 7X-as well as the twin-engine 2000DX and 2000LX.

SOURCE Dassault Falcon

Contact:
Dassault Falcon
Press Contacts: Dassault Aviation (France), Vadim Feldzer, Tel. +33-1-47-11-44-13, Marie-Alexandrine Munoz, Tel. +33-1-47-11-64-23; Dassault Falcon (USA), Ralph Aceti, Tel. +1-201-541-45-85, Andrew Ponzoni Tel. +1-201-541-4588

Featured Video
Editorial
Jobs
Mechanical Engineer 2 for Lam Research at Fremont, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Equipment Engineer, Raxium for Google at Fremont, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise