National Renewable Energy Laboratory Analysis Shows Promise for New Remote Sensing Technology in Wind Resource Assessment

Final study of Second Wind's Triton Sonic Wind Profiler shows excellent correlation with meteorological tower-based measurements

DALLAS, May 25 — (PRNewswire) — A study by the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) confirms that measurements taken by Second Wind's Triton wind profiler system of wind speed and direction correlated well to meteorological (met) tower-based measurements.

"The Triton measurements correlated well with the met tower measurements during the six months we studied," said NREL Principal Scientist Dennis Elliott. "We see Triton as a valid stand-alone system for wind measurement studies. In addition, Triton was reliable, with an uptime of over 98 percent."

Triton is a ground-based remote sensing system that uses sodar to measure wind up to and above the 140-meter blade tip height of current utility-grade wind turbines. Designed for wind energy applications including wind resource assessment, micro-siting of wind turbines and ongoing monitoring of wind conditions on working wind farms, Triton has been in commercial use since April 2008.

"Any new technology faces an acceptance curve," said Larry Letteney, CEO of Second Wind. "This important study shows that Triton correlates well with the earlier technology, and is a sign of growing acceptance of Triton as a valid wind measurement technology."

In the NREL study, conducted under a Cooperative Research and Development Agreement (CRADA), Second Wind provided NREL with more than six months of data from a measurement program conducted by a wind farm developer near an operating wind farm in Texas. The study collected data from a Triton and from an 80-meter met tower located nearby.

"We're gratified by the results of the NREL study," said Walter Sass, CTO of Second Wind. "We have done numerous correlation studies that demonstrate Triton's reliability and correlation with tower measurements. Having a respected national laboratory review our technology and confirm its correlation to the older, accepted standard is an important milestone for us. We are pleased to be able to contribute to NREL's ongoing research in characterizing the performance of wind instruments."

The study found that the Triton data set "shows excellent agreement with the tower measurements" and also mentions Triton's operational reliability, citing uptime of greater than 98 percent during the study period. A copy of the final study may be viewed at http://www.secondwind.com/landing/nrel.html.

About NREL

NREL is the U.S. Department of Energy's primary national laboratory for renewable energy and energy efficiency research and development. NREL is operated for DOE by The Alliance for Sustainable Energy, LLC.

About Second Wind Inc.

Second Wind develops wind measurement systems that make wind power pay off for consumers, investors and the environment. The company's technology provides wind farm developers with the bankable wind data they need to plan, finance and operate highly efficient wind generation facilities. Second Wind's systems are making wind farm development profitable in 40 countries on seven continents. Second Wind's systems include the wind industry's leading remote sensing system, wind data logger and web-based data service. For more information about Boston-based Second Wind, please visit  www.secondwind.com.

Visit Second Wind at Booth #6613 at WINDPOWER 2010

SOURCE Second Wind

Contact:
Second Wind
U.S. Department of Energy
National Renewable Energy Laboratory
MEDIA: Jill Searl, of Beaupre
Phone: +1-603-559-5824
Email Contact
Web: http://www.secondwind.com

Featured Video
Editorial
Jobs
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 2 for Lam Research at Fremont, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Engineer 3 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise