Oclaro 100G CFP2 LR4 transceiver completes dual-rate interoperability testing with Xilinx FPGA and joins the 100G CFP LR4 in volume production accelerating market adoption
SAN JOSE, Calif., Sept. 18, 2013 — (PRNewswire) — Oclaro, Inc. (NASDAQ: OCLR), a leading provider and innovator of optical communications solutions, today announced that the dual-rate 100G CFP2 LR4 transceiver, which is fully-interoperable with the 100G CFP LR4 transceiver supporting both OTU-4 and 100GbE interfaces, has joined that module in volume production. Approximately 30 customers have already qualified or are in the process of qualifying the Oclaro 100G pluggable LR4 transceiver modules. The 100G MSA-compliant CFP2 LR4 module recently completed interoperability testing with the Xilinx Virtex®-7 H580T FPGA for OTU-4 based on the OIF CEI-28G-VSR board interface specification. Both the Oclaro CFP and CFP2 LR4 modules have now passed testing for both data rates. Oclaro will be meeting with customers at ECOC, the largest European optical communications event from September 23-25, 2013 in London, UK Meeting Room MR3.A fully-interoperable pair of CFP and CFP2 LR4 transceivers offer network equipment manufacturers the flexibility to rapidly and easily capitalize on the smaller form factor and lower power consumption of the CFP2, while offering their customers an attractive upgrade path from deployed equipment with CFP cages to increase system front panel bandwidth with higher module density and/or to lower system power consumption per 100G interface. As the CFP MSA standard continues its growth as the form factor of choice for adoption in many 100G enterprise and data center applications, Oclaro is well positioned to help customers lead this next phase of high-speed networking.
"Xilinx and Oclaro have successfully achieved interoperability between the Xilinx Virtex-7 H580T FPGA and the Oclaro 100G CFP2 LR4 optical module showing an error free connection at 28.0 Gbit/s," said Gilles Garcia, Director of Wired Communications at Xilinx. "With this achievement, together with previously demonstrated interoperability at 25.7 Gbit/s, system OEMs designing transport, networking and data center applications can now realize 100 Gigabit Ethernet and 100G OTL4.4 applications with lower cost and power, enabling either more efficient or higher density network line cards."
"We are delighted to see the interest from our customers for both our 100G CFP and CFP2 LR4 transceiver products. This confirms the value of our strategy to continuously work to reduce size and power while providing backward compatibility when possible to ease customer adoption," said Yoshikazu Era, General Manager, Oclaro Japan Module Division. "This confirms our market leadership which relies on our technology resources, vertical integration, as well as design and development expertise."
About Oclaro 100G pluggable LR4 transceiver products
Oclaro offers a second-generation CFP LR4 transceiver and a CFP2 LR4 MSA-compliant transceiver. The two products interoperate at both 100GbE and OTU-4 formats in accordance with respective standards. Furthermore, the CFP2 transceiver has successfully passed interoperability testing with the Xilinx Virtex-7 H580T FPGA.
Second-Generation 100G CFP LR4 transceiver
- Compliant with CFP MSA at 16W power consumption
- 103.125 & 111.810 Gbit/s Dual Rate Operation
- Fully-compliant with IEEE 100G Ethernet 802.3a 100GBASE-LR4, ITU-T G.959.1 4I1-9D1F standards
- CAUI/OTL4.4 standard-compliant board interface
- Leverages more than two years of manufacturing experience from the first-generation CFP
- Uses in-house TOSA and ROSA technologies with proven high quality and backward compatibility
- Fully-compliant with MSA, IEEE and ITU-T specifications, and Telcordia qualified to GR-468
100G CFP2 LR4 transceiver
- Compliant with CFP MSA at 12W power consumption
- 103.125 & 111.810 Gbit/s Dual-Rate Operation
- Fully-compliant with IEEE 100G Ethernet 802.3a 100GBASE-LR4, ITU-T G.959.1 4I1-9D1F standards
- OIF CEI-28G-VSR standard-compliant board interface
- Roughly 50% the size of all other CFP solutions on the market
- Double system front panel port density from 4 ports for CFP to 8 ports for CFP2
- Omission of gearbox offers savings relative to CFP
- Interoperates with first and second-generation CFP transceivers so customers can quickly and cost-effectively transition to CFP2 designs
- Fully-compliant with MSA, IEEE and ITU-T specifications, and Telcordia qualified to GR-468
- Interoperable with Xilinx Virtex-7 H580T FPGA for both 100GbE and OTU-4
Product Availability
The second-generation CFP and CFP2 transceivers are in volume production and available now.
About Oclaro
Oclaro, Inc. (NASDAQ: OCLR) is one of the largest providers of optical components, modules and subsystems for the optical communications market. The company is a global leader dedicated to photonics innovation, with cutting-edge research and development (R&D) and chip fabrication facilities in the U.S., U.K., Italy, Korea and Japan. It has in-house and contract manufacturing sites in China, Malaysia and Thailand, with design, sales and service organizations in most of the major regions around the world. For more information, visit http://www.oclaro.com.
Copyright 2013. All rights reserved. Oclaro, the Oclaro logo, and certain other Oclaro trademarks and logos are trademarks and/or registered trademarks of Oclaro, Inc. or its subsidiaries in the US and other countries. All other trademarks are the property of their respective owners. Information in this release is subject to change without notice.
SOURCE Oclaro, Inc.
| Contact: |
| Oclaro, Inc.
Deborah Reinert, Oclaro, Inc. Phone: +1 (408) 919-2749 Email Contact Web: http://www.oclaro.com |