Maxim Power Corp. Announces 2014 Second Quarter Financial and Operating Results

FEDERAL ENERGY REGULATORY COMMISSION ("FERC") INQUIRY

As previously reported, MAXIM and its external legal counsel have made a submission to FERC and FERC's Office of Enforcement refuting the allegations made in the Office of Enforcement's preliminary findings on this matter. Neither FERC nor its Office of Enforcement has responded to MAXIM's submission.

SALE OF MAXIM POWER (B.C.) INC.

On July 17, 2014, MAXIM closed the sale of its wholly-owned subsidiary, Maxim Power (B.C.) Inc. ("Maxim BC") to Village Farms International, Inc. Maxim BC owns and operates the Vancouver Landfill Power Project, a 7.4 MW electrical and 9.1 MW thermal energy landfill gas cogeneration project in Delta, BC. Proceeds from the sale are $5.2 million and will be utilized for strategic corporate purposes. This transaction concludes the sale of MAXIM's investments in British Columbia, with the sale of MAXIM's other B.C. asset, the Hartland Generating Facility, in 2013. The sale of these two investments resulted in an approximate net gain of $128 thousand.

COMAX FRANCE S.A.S. ("COMAX") CAPITAL PROGRAM

COMAX has secured debt financing of $8.8 million (6.0 million Euro) for four of its five 2014 renovation projects. The terms of the loans are favorable with leverage ranging from 80% to 91% of the project investment and fixed interest rates ranging from 3.0% to 4.5%. MAXIM anticipates securing the debt financing for the fifth project in August 2014. Total 2014 capital expenditures related to the renovation program in COMAX are anticipated to be $14.4 million (9.8 million Euro) of which $12.0 million (8.2 million Euro) will be financed with debt. COMAX has revised the scope of two of its 2014 renovation projects in addition to deferring two additional renovation projects, originally included in the 2014 renovation program scope, to early 2015.

GROWTH INITIATIVES

Summit Coal Limited Partnership ("SUMMIT")

SUMMIT is MAXIM's development initiative located north of Grande Cache, Alberta that owns metallurgical coal leases for Mine 14 ("M14") and Mine 16S ("M16S"). This initiative is construction ready and is the most advanced metallurgical coal mine development project in North America.

Current estimates for M14 are 18.9 million tonnes of low-mid volatile metallurgical coal reserves with a mine life of 17 years based on the NI 43-101 Technical Report filed on SEDAR on March 21, 2013. M16S is located 30 kilometers northwest of M14 and represents 1,792 hectares or 29% of SUMMIT's total area of coal leases. A NI 43-101 Technical Report has not been prepared for the Mine 16S property. The coal quality of M14 has been tested by numerous potential buyers and independent labs and is a very coveted mid to low volatility coking coal with other attributes which are best-in-class.

The Corporation considers the advancement of the M14 and M16S development projects strategic for MAXIM primarily because of the value of metallurgical coal and partially due to Milner's ability to utilize tailings and lower quality fuels, which are by-products of the beneficiation of coal, to produce electricity. All monetization options including: i) construction, own and operate, ii) joint venture or iii) outright sale, have been preserved for SUMMIT and the evaluation of these options is ongoing.

Deerland Peaking Station ("D1")

MAXIM is actively pursuing commercial arrangements that will allow for the full-scale construction of the 190 MW D1 Station. This project is attractive due to an anticipated contraction of reliable base load supply in the Alberta power market. MAXIM had previously received regulatory approvals to construct and operate D1 and has entered into an agreement to secure firm natural gas transportation services. The D1 site is located near Bruderheim in Alberta's Industrial Heartland, and it is in close proximity to the entry point of the proposed Gateway pipeline and adjacent to the existing Deerland high voltage substation. This area is expected to experience significant growth in electrical demand.

Milner Expansion ("M2")

On June 4, 2014, the AUC approved MAXIM's application to convert the fuel source for the M2 project from coal to natural gas and to increase the generating capacity of the proposed expansion from 500 MW to 520 MW. The M2 facility would be adjacent to the existing 150 MW Milner generating facility. The existing infrastructure at the Milner site allows MAXIM to leverage benefits including electrical connection, fuel delivery, water licenses and a skilled operations team. The Corporation incurred costs in 2014 related to engineering and consulting work for permit amendments and will incur further costs in 2014 on engineering consultation.

Buffalo Atlee ("B1")

MAXIM acquired the B1 Power Project, situated near Brooks, Alberta, through an amalgamation with EarthFirst Canada Inc. This project has the potential for development of over 200 MW of wind generation capacity. Wind data has been collected on the site for approximately six years and supports project development based on expected new provincial greenhouse gas legislation and/or higher power prices than currently forecasted. MAXIM holds an exploratory Crown land permit with a term of five years, expiring on January 1, 2016. The addition of wind generation to MAXIM's existing portfolio of assets will diversify MAXIM's generation fuel types and provide the potential to offset the impact of expected new provincial greenhouse gas legislation.

CONFERENCE CALL FOR Q2 2014 RESULTS

MAXIM will host a conference call for analysts and investors on Wednesday, August 6, 2014 at 11:00 am MDT. The call will be hosted by John Bobenic, MAXIM's President and Chief Executive Officer, and by Mike Mayder, Vice President, Finance and Chief Financial Officer. To participate in this conference call please dial (877) 223-4471 or (647) 788-4922 in the Toronto area. It is recommended that participants call at least ten minutes prior to start time.

A recording of the conference call will be available from August 6, 2014 to August 13, 2014. To access the replay, dial (800) 585-8367 or (416) 621-4642 followed by the passcode 79725472. In addition, the recording will be available commencing August 6, 2014 in the Investor Relations section of MAXIM's website at www.maximpowercorp.com.

About MAXIM

Based in Calgary, Alberta, MAXIM is an independent power producer, which acquires or develops, owns and operates innovative and environmentally responsible power and power related projects. MAXIM currently owns and operates 39 power plants in Alberta, the United States and France, having 777 MW of electric generating capacity. MAXIM trades on the TSX under the symbol "MXG". For more information about MAXIM, visit our website at www.maximpowercorp.com.

Statements in this release which describe MAXIM's intentions, expectations or predictions, or which relate to matters that are not historical facts are forward-looking statements. These forward-looking statements involve known and unknown risks and uncertainties which may cause the actual results, performances or achievements of MAXIM to be materially different from any future results, performances or achievements expressed in or implied by such forward-looking statements. MAXIM may update or revise any forward-looking statements, whether as a result of new information, future events or changing market and business conditions and will update such forward-looking statements as required pursuant to applicable securities laws.

Contacts:
Maxim Power Corp.
John R. Bobenic
President and CEO
(403) 750-9300

Maxim Power Corp.
Michael R. Mayder
Vice President, Finance and CFO
(403) 750-9311

www.maximpowercorp.com




« Previous Page 1 | 2             
Featured Video
Editorial
Jobs
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 3 for Lam Research at Fremont, California
Mechanical Engineer 2 for Lam Research at Fremont, California
Equipment Engineer, Raxium for Google at Fremont, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Automate 2025 at Detroit, Michigan, USA MI - May 12 - 15, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise