NIBS: Next BSSC Webinar Will Look at New Ground Motion Requirements of ASCE 7-16
[ Back ]   [ More News ]   [ Home ]
NIBS: Next BSSC Webinar Will Look at New Ground Motion Requirements of ASCE 7-16

 

Dr. Charles A.
                                                Kircher  
   

Jul 13, 2017 -- The National Institute of Building Sciences Building Seismic Safety Council (BSSC) will host a special webinar to address the newest ground motion requirements of the American Society of Civil Engineers (ASCE)/Structural Engineering Institute (SEI) standard, ASCE 7-16: Minimum Design Loads for Buildings and Other Structures. Sponsored by the Federal Emergency Management Agency (FEMA), the free webinar, “New Site-Specific Ground Motion Requirements of ASCE 7-16,” is scheduled for Friday, July 28, 2017, from 2:00 pm to 3:00 pm ET (11:00 am to 12:00 pm PT).

The presenter, Dr. Charles A. Kircher, is a member of the BSSC Provisions Update Committee (PUC) and BSSC Project 17 Committee, as well as the ASCE 7 Seismic Subcommittee. He will talk about how the new site-specific design requirements were developed to address an identified shortcoming in the method for buildings on softer sites.

Previously, the equivalent lateral force (ELF) and modal response spectrum analysis (MRSA) seismic design procedures related to the use of only two response periods, Time period (T) = 0.2 seconds (s) and T = 1.0 s, to define seismic design forces in the domains of constant acceleration and constant velocity, respectively. Although approximate, the domains of constant acceleration and velocity provide a reasonably accurate and conservative representation for response at stiffer sites governed by smaller magnitude earthquakes, but are generally inaccurate and un-conservative at softer sites (e.g., Site Classes D and E), in particular, sites for which the seismic hazard is dominated by large magnitude earthquakes. Exceptions to the new site-specific design requirements permit ELF and MRSA design using values of seismic design parameters increased by as much as 50 percent to avoid potential underestimation of design earthquake ground motions.

Dr. Kircher is a registered professional engineer with more than 35 years of experience in earthquake engineering, focusing on vulnerability assessment, risk analysis and innovative design solutions, as well as seismic code development. As Principal of Kircher & Associates, he provides consulting services to a variety of clients that includes commercial and industrial businesses; military and government organizations; and other engineering companies. He holds B.S., M.S., Engineer and Ph.D. degrees from Stanford University. In addition to his work on PUC, Project 17 and ASCE 7, Dr. Kircher is a Fellow of the Structural Engineers Association of California (SEAOC), an Honorary Member of the Structural Engineers Association of Northern California (SEAONC) and long-standing participant in SEAONC activities. He has served on the SEAONC Board of Directors, chaired the Seismology Committee and Base Isolation Subcommittee, served on the Seismology Ground Motion Subcommittee and coauthored the 1990 Blue Book, Tentative General Requirements for the Design and Construction of Seismic-Isolated Structures, Appendix 1L.

EARN AND LEARN
Attendees who are engineers are eligible to earn one Professional Development Hour (PDH) for the webinar, code officials are eligible to earn 0.1 Continuing Education Units (CEUs) and architects are eligible to earn one health/safety/welfare (HSW) CEU. People are encouraged to watch the webinar together as a group or a firm, but all viewers must sign up individually to receive learning unit verifications.

REGISTER TO ATTEND
Sign up now to attend the free “New Site-Specific Ground Motion Requirements of ASCE 7-16” webinar on July 28. Space is limited, so don’t wait. Register today!

Want to see what other topics BSSC has arranged for the 2017 webinar series?

View the schedule.

 

About the NEHRP Recommended Provisions

Under the sponsorship of FEMA, BSSC administers an ongoing consensus-based process of updating and maintaining the NEHRP Recommended Provisions for New Buildings and Other Structures. The NEHRP Recommended Provisions and its Commentary and resource papers embody the state-of-knowledge criteria for design and construction of new buildings subject to earthquake hazards. The new knowledge and technologies contained in this resource document are diffused into the model building codes developed by the International Code Council (ICC) and several national standards, including the American Society of Civil Engineers (ASCE) Structural Engineering Institute (SEI) ASCE/SEI-7 Minimum Design Loads for Buildings and Other Structures. Learn more about the 2015 NEHRP Provisions.

About the Building Seismic Safety Council

The Building Seismic Safety Council (BSSC) is an independent, voluntary membership body representing a wide variety of building community interests related to seismic safety. Its fundamental purpose is to enhance public safety by providing a national forum that fosters improved seismic safety provisions for use by the building community in the planning, design, construction, regulation and utilization of buildings.

 

About the National Institute of Building Sciences

The National Institute of Building Sciences, authorized by public law 93-383 in 1974, is a nonprofit, nongovernmental organization that brings together representatives of government, the professions, industry, labor and consumer interests to identify and resolve building process and facility performance problems. The Institute serves as an authoritative source of advice for both the private and public sectors with respect to the use of building science and technology.

An Authoritative Source of Innovative Solutions for the Built Environment