voxeljet AG Reports Financial Results for the Second Quarter and Six Months Ended June 30, 2020

Financial result was negative kEUR 191 for the six months ended June 30, 2020, compared to a financial result of negative kEUR 345 in the comparative period in 2019. This was mainly related to higher finance income related to the revaluation of derivative financial instruments amounting to kEUR 574 compared to a finance income of kEUR 58 in the last year’s same period. Financial result also consists of interest expense for long-term debt amounted to kEUR 609 in the six months ended June 30, 2020, compared to kEUR 491 for the six months ended June 30, 2019.

Net loss for the six months ended June 30, 2020 was kEUR 7,724, or EUR 1.59 per share, as compared to net loss of kEUR 6,535, or EUR 1.33 per share in the prior year period.

Based on a conversion rate of five ADSs per ordinary share, net loss was EUR 0.32 per ADS for the six months ended June 30, 2020 compared to net loss of EUR 0.27 per ADS in the prior year period.

Business Outlook

Our revenue guidance for the third quarter of 2020 is expected to be in the range of kEUR 6,000 to kEUR 8,000.

We reaffirm our guidance for the full year ending December 31, 2020:

- Full year revenue is expected to be in the range of kEUR 26,000 to kEUR 30,000

- Gross margin is expected to be above 40%

- Operating expenses for the full year are expected as follows: selling and administrative expenses are expected to be in the range of kEUR 13,000 to kEUR 13,250 and R&D expenses are projected to be between approximately kEUR 5,750 and kEUR 6,250. Depreciation and amortization expense is expected to be between kEUR 3,750 and kEUR 4,000.

- Adjusted EBITDA for the second half of the year ending December 31, 2020 is expected to be neutral-to-positive. Adjusted EBITDA is defined as net income (loss), as calculated under IFRS accounting principles before interest (income) expense, provision (benefit) for income taxes, depreciation and amortization, and excluding other operating (income) expense resulting from foreign exchange gains or losses on the intercompany loans granted to the subsidiaries.

- Capital expenditures are projected to be in the range of kEUR 500 to kEUR 1,000, which primarily includes ongoing investments in our global subsidiaries.

Our total backlog of 3D printer orders at June 30, 2020 was kEUR 7,563, which represents nine 3D printers. This compares to a backlog of kEUR 2,792 representing three 3D printers, at December 31, 2019. As production and delivery of our printers is generally characterized by lead times ranging between three to nine months, the conversion rate of order backlog into revenue is dependent on the equipping process for the respective 3D printer, as well as the timing of customers’ requested deliveries.

At June 30, 2020, we had cash and cash equivalents of kEUR 6,451 and restricted cash of kEUR 1,420 and held kEUR 2,875 of investments in bond funds, thereof kEUR 2,000 restricted, which are included in current financial assets on our consolidated statements of financial position.

Webcast and Conference Call Details

The Company will host a conference call and webcast to review the results for the first and second quarter 2020 on Friday, August 14, 2020 at 8:30 a.m. Eastern Time. Participants from voxeljet will include its Chief Executive Officer, Dr. Ingo Ederer, and its Chief Financial Officer, Rudolf Franz, who will provide a general business update and respond to investor questions.

Interested parties may access the live audio broadcast by dialing 1-877-705-6003 in the United States/Canada, or 1-201-493-6725 for international, Conference Title “voxeljet AG 2Q and 1H 2020 Financial Results Conference Call”. Investors are requested to access the call at least five minutes before the scheduled start time in order to complete a brief registration. An audio replay will be available approximately two hours after the completion of the call at 1-844-512-2921 or 1-412-317-6671, Replay Conference ID number 13706990. The recording will be available for replay through August 21, 2020.

A live webcast of the call will also be available on the investor relations section of the Company’s website. Please go to the website https://event.on24.com/wcc/r/2508745/127EB0E35073B286CC352139D3BC4766 at least fifteen minutes prior to the start of the call to register, download and install any necessary audio software. A replay will also be available as a webcast on the investor relations section of the Company’s website.

Non-IFRS Measure

Management regularly uses both IFRS and non-IFRS results and expectations internally to assess its overall performance of the business, making operating decisions, and forecasting and planning for future periods. Management believes that Adjusted EBITDA is a useful financial measure to the Company’s investors as it helps investors better understand and evaluate the projections our management board provides. The Company’s calculation of Adjusted EBITDA may not be comparable to similarly titled financial measures reported by other peer companies. Adjusted EBITDA should not be considered as a substitute to financial measures prepared in accordance with IFRS.

The Company uses Adjusted EBITDA as a supplemental financial measure of its financial performance. Adjusted EBITDA is defined as net income (loss), as calculated under IFRS accounting principles, interest (income) expense, provision (benefit) for income taxes, depreciation and amortization, and excluding other (income) expense resulting from foreign exchange gains or losses on the intercompany loans granted to the subsidiaries. Management believes Adjusted EBITDA to be an important financial measure because it excludes the effects of fluctuating foreign exchange gains or losses on the intercompany loans granted to its subsidiaries. We are unable to reasonably estimate the potential full-year financial impact of foreign currency translation because of volatility in foreign exchange rates. Therefore, we are unable to provide a reconciliation to our forward-looking guidance for non-GAAP Adjusted EBITDA without unreasonable effort as certain information necessary to calculate such measure on an IFRS basis is unavailable, dependent on future events outside of our control and cannot be predicted without unreasonable efforts by the Company.

Exchange rate

This press release contains translations of certain U.S. dollar amounts into euros at specified rates solely for the convenience of readers. Unless otherwise noted, all translations from U.S. dollars to euros in this press release were made at a rate of USD 1.1237 to EUR 1.00, the noon buying rate of the Federal Reserve Bank of New York for the Euro on June 30, 2020.

About voxeljet

voxeljet is a leading provider of high-speed, large-format 3D printers and on-demand parts services to industrial and commercial customers. The Company’s 3D printers employ a powder binding, additive manufacturing technology to produce parts using various material sets, which consist of particulate materials and proprietary chemical binding agents. The Company provides its 3D printers and on-demand parts services to industrial and commercial customers serving the automotive, aerospace, film and entertainment, art and architecture, engineering and consumer product end markets. For more information, visit http://www.voxeljet.de/en/.

Cautionary Statement on Forward-Looking Statements

This press release contains forward-looking statements concerning our business, operations and financial performance. Any statements that are not of historical facts may be deemed to be forward-looking statements. You can identify these forward-looking statements by words such as ‘‘believes,’’ ‘‘estimates,’’ ‘‘anticipates,’’ ‘‘expects,’’ ‘‘projects,’’ ‘‘plans,’’ ‘‘intends,’’ ‘‘may,’’ ‘‘could,’’ ‘‘might,’’ ‘‘will,’’ ‘‘should,’’ ‘‘aims,’’ or other similar expressions that convey uncertainty of future events or outcomes. Forward-looking statements include statements regarding our intentions, beliefs, assumptions, projections, outlook, analyses or current expectations concerning, among other things, our results of operations, financial condition, business outlook, the industry in which we operate and the trends that may affect the industry or us. Although we believe that we have a reasonable basis for each forward-looking statement contained in this press release, we caution you that forward-looking statements are not guarantees of future performance. All of our forward-looking statements are subject to known and unknown risks, uncertainties and other factors that are in some cases beyond our control and that may cause our actual results to differ materially from our expectations, including those risks identified under the caption “Risk Factors” in the Company’s Annual Report on Form 20-F and in other reports the Company files with the U.S. Securities and Exchange Commission, as well as the risk that our revenues may fall short of the guidance we have provided in this press release. Except as required by law, the Company undertakes no obligation to publicly update any forward-looking statements for any reason after the date of this press release whether as a result of new information, future events or otherwise.

« Previous Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15  Next Page »
Featured Video
Editorial
Jobs
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 2 for Lam Research at Fremont, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Equipment Engineer, Raxium for Google at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise