PyroGenesis Announces 28-Day Lab Strength Tests Achieve Up to 99.56% Above Compressive Strength Target for Green Cement Additive Product

Neither the Toronto Stock Exchange, its Regulation Services Provider (as that term is defined in the policies of the Toronto Stock Exchange) nor the OTCQX Best Market accepts responsibility for the adequacy or accuracy of this press release.

For further information please contact:
Rodayna Kafal, Vice President, IR/Comms. and Strategic BD
E-mail: ir@pyrogenesis.com
http://www.pyrogenesis.com

Images accompanying this announcement are available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/e7927011-62b4-476f-b155-1a2ba79ac776
https://www.globenewswire.com/NewsRoom/AttachmentNg/e9166c75-8f46-4dff-85c8-429d193036a2
https://www.globenewswire.com/NewsRoom/AttachmentNg/161e5fa6-8a35-4b6b-b695-812373c63829
https://www.globenewswire.com/NewsRoom/AttachmentNg/9a2b016c-c7be-4dff-8c19-4705685a25ef
https://www.pyrogenesis.com/wp-content/uploads/2024/04/pyrogenesis-quartz-to-amorphous-silica.png 

References
[1] Lo, F. C., Lee, M. G., & Lo, S. L. ( 2021). Effect of coal ash and rice husk ash partial replacement in ordinary Portland cement on pervious concrete. Construction and Building Materials286, 122947.
[2] Kathirvel, P., & Murali, G. ( 2023). Effect of using available GGBFS, silica fume, quartz powder and steel fibres on the fracture behavior of sustainable reactive powder concrete. Construction and Building Materials375, 130997.
[3] Uddin, M. A., Bashir, M. T., Khan, A. M., Alsharari, F., Farid, F., & Alrowais, R. ( 2023). Effect of Silica Fume on Compressive Strength and Water Absorption of the Portland Cement–Silica Fume Blended Mortar. Arabian Journal for Science and Engineering, 1-9.
[4] Sævarsdottir, G., Kvande, H., & Magnusson, T. ( 2021). Greenhouse gas emissions from silicon production-development of carbon footprint with changing energy systems. In Proceedings of the 16th International Ferro-Alloys Congress (INFACON XVI).
[5] Manjunatha, M., Preethi, S., Mounika, H. G., & Niveditha, K. N. ( 2021). Life cycle assessment (LCA) of concrete prepared with sustainable cement-based materials. Materials Today: Proceedings47, 3637-3644.
[6] Habert, G., Miller, S. A., John, V. M.,Provis, J. L., Favier, A., Horvath, A., & Scrivener, K. L. ( 2020). Environmental impacts and decarbonization strategies in the cement and concrete industries. Nature Reviews Earth & Environment1(11), 559-573.


i https://www.astm.org/c0618-12.html


Primary Logo

PozPyro Strength Activity Index (SAI) %Gain Vs. Portland Cement Table

PozPyro Strength Activity Index (SAI) %Gain Vs. Portland Cement Table
Compressive Strength (CS) Tests of Cement - Individual Test Results

A comparison of the four individual Series A and Series B strength tests, measured at 7- and 28-days in megapascals (MPa) of a 20% PozPyro/80% Portland Cement blend against a 100% pure Portland Cement control, a 20% fly ash blend, a 20% ground granulated blast-furnace slag (GGBFS) blend, and a 20% silica fume blend produced using traditional methods.
Compressive Strength (CS) Test of Cement - Averaged Result by Test Series

A comparison of the Series A and Series B strength tests, measured at 7- and 28-days in megapascals (MPa) of a 20% PozPyro/80% Portland Cement blend, using averages of each of two tests within both Series A and Series B, against 100% pure Portland Cement control, 20% fly ash blend, 20% ground granulated blast-furnace slag (GGBFS) blend, and 20% silica fume blend.
Comparing CO2 Emission of Cement Additive Production

A comparison of CO2 emitted during the production of 1 tonne of PozPyro vs. other cement additive products. CO2 emission assigned to PozPyro comes from production of electricity subsequently used by the process, not from the process itself.
Conversion of Crystalline Quartz to Amorphous Silica through PyroGenesis’ Plasma Process

A zero-CO2, energy-efficient conversion of crystalline quartz to amorphous silica through PyroGenesis’ plasma process.


« Previous Page 1 | 2 | 3             
Featured Video
Editorial
Jobs
Equipment Engineer, Raxium for Google at Fremont, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 2 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise