Ouster Announces Record Revenue and Margin for First Quarter 2024

Record revenue of $26 million, up 51% year over year

GAAP gross margin of 29% and record non-GAAP gross margin of 36%

SAN FRANCISCO — (BUSINESS WIRE) — May 9, 2024Ouster, Inc. (NYSE: OUST) (“Ouster” or the “Company”), a leading global provider of high-performance lidar sensors and software solutions for the automotive, industrial, robotics, and smart infrastructure industries, announced today financial results for the three months ended March 31, 20241.

First Quarter 2024 Highlights

  • $26 million in revenue, up 51% year over year and 6% sequentially.
  • Shipped approximately 4,500 sensors for revenue.
  • GAAP gross margin of 29%, compared to (2%) in the first quarter of 2023 and 22% in the fourth quarter of 2023.
  • Non-GAAP gross margin2 of 36%, compared to 25% in the first quarter of 2023 and 35% in the fourth quarter of 2023.
  • Net loss of $24 million, compared to $177 million in the first quarter of 2023 and $39 million in the fourth quarter of 2023.
  • Adjusted EBITDA2 loss of $12 million, compared to $27 million in the first quarter of 2023 and $14 million in the fourth quarter of 2023.
  • Cash, cash equivalents, restricted cash, and short-term investments balance of $189 million as of March 31, 2024.

“Ouster continued its momentum into the first quarter after a strong 2023. We delivered revenue of $26 million and non-GAAP gross margin of 36%, both representing record levels. Alongside our strong operational results, we continued to advance the development of our next generation hardware products and software solutions,” said Ouster CEO Angus Pacala. “We are committed to achieving the goals we set for 2024 that aim to further extend Ouster’s competitive advantage and bring us closer to achieving profitability.”

Revenue growth in the first quarter was driven by large orders from customers in the robotics and automotive verticals, specifically for warehouse robotics, mapping, and autonomous vehicles. GAAP gross margin improved to 29% compared to (2%) in the first quarter of 2023, which was primarily driven by higher revenues, favorable product mix, lower manufacturing costs, and fewer costs related to inventory charges and purchase commitments. Non-GAAP gross margin increased to a record 36% compared to 25% in the first quarter of 2023. Non-GAAP gross margin excludes the impact of certain expenses outside of ordinary operations associated with the consolidation of product lines and outsourced manufacturing of Velodyne products.

_______________

1 The financial results for the three months ended March 31, 2023 are composed of Ouster standalone performance through February 10, 2023 and combined performance of Ouster and Velodyne for the remainder of the period. The results for the three months ended March 31, 2024 and December 31, 2023 reflect the combined performance of Ouster and Velodyne.

2 Adjusted EBITDA loss and non-GAAP gross margin are non-GAAP financial measures. See Non-GAAP Financial Measures for additional information and reconciliations of these measures to their respective most directly comparable financial measures calculated in accordance with U.S. GAAP.

2024 Business Objective Updates

  1. Expand software solutions and grow the installed base
  2. Advance the development of digital lidar hardware
  3. Progress on the long-term financial framework

Expand software solutions and grow the installed base: During the first quarter, Ouster continued to expand its software solutions with a new deep learning model that increases accuracy and detection range. The Company also enhanced Ouster Gemini with the ability to more seamlessly integrate with leading video management system vendors, helping to accelerate adoption in the multi-billion dollar security industry. Ouster also recently collaborated with a recipient of the U.S. Department of Transportation SMART Grant to assist with improving pedestrian safety, near miss detection, traffic counting, and traffic flow analytics.

Advance the development of digital lidar hardware: Ouster continued to execute on its product roadmap in the first quarter. The Company introduced new firmware designed to improve the performance capabilities of its REV7 sensors, coinciding with heightened interest from AI and robotics customers. Ouster’s next generation “L4” custom silicon chip is taped out and is expected to bring significant improvements in performance, reliability, and manufacturability, along with safety certifications to the OS sensor family. The Company plans to integrate the Chronos chip into its final form factor, solid-state digital flash (“DF”) sensors in the next year.

Progress on the long-term financial framework: Ouster advanced on its long-term financial framework during the first quarter. With revenue growth of 51% year over year, GAAP gross margin of 29%, and operating expenses 14% below third quarter 2023 levels, Ouster is progressing on its path to profitability.

Second Quarter 2024 Outlook

For the second quarter of 2024, Ouster expects to achieve $26 million to $28 million in revenue.

Upcoming Investor Events

Ouster management will participate in the following upcoming investor event:

  • Oppenheimer 9th Annual Emerging Growth Conference – Virtual, May 10th, 2024

Conference Call Information

Ouster will host a conference call and live webcast for analysts and investors at 5:00 p.m. ET today, May 9, 2024 to discuss its financial results and business outlook. To access the call, please register at https://registrations.events/direct/Q4I934282.

Upon registering, each participant will be provided with call details and a registrant ID. The webcast and related presentation materials will be accessible for at least 30 days on Ouster’s investor relations website at https://investors.ouster.com. A telephone replay of the call will be available 2 hours after the call ends, and can be accessed via phone through May 23, 2024 by dialing (800) 770-2030 from the U.S. or +1 (609) 800-9909 from outside the U.S. The conference I.D. number is 93428.

About Ouster

Ouster (NYSE: OUST) is a leading global provider of lidar sensors and software solutions for the automotive, industrial, robotics, and smart infrastructure industries. Ouster is on a mission to build a safer and more sustainable future by offering affordable, high-performance sensors that drive mass adoption across a wide variety of applications. Ouster is headquartered in San Francisco, CA with offices in the Americas, Europe, and Asia Pacific. For more information, visit www.ouster.com, or connect with us on X or LinkedIn.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. The Company intends such forward-looking statements to be covered by the safe harbor provisions for forward-looking statements contained in Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934, as amended. Such statements are based upon current plans, estimates and expectations of management that are subject to various risks and uncertainties that could cause actual results to differ materially from such statements. The inclusion of forward-looking statements should not be regarded as a representation that such plans, estimates and expectations will be achieved. Words such as “anticipate,” “expect,” “project,” “intend,” “believe,” “may,” “will,” “should,” “plan,” “could,” “continue,” “target,” “contemplate,” “estimate,” “forecast,” “guidance,” “predict,” “possible,” “potential,” “pursue,” “likely,” and the negative of these terms and similar expressions are intended to identify forward-looking statements, though not all forward-looking statements use these words or expressions. All statements, other than statements of historical fact, including statements regarding Ouster’s revenue guidance for the second quarter of 2024; anticipated new product launches and developments; Ouster’s future results of operations, cash reserve and financial position; the anticipated timing and development of Ouster’s next generation hardware and software solutions; the execution against the Company’s product roadmap and demand for products; the Company’s path to profitability and long-term financial framework; industry and business trends; Ouster’s business objectives, plans, strategic partnerships, and market growth; and Ouster’s competitive market position, all constitute forward-looking statements. All forward-looking statements are subject to risks and uncertainties that may cause actual results to differ materially from those that we expected, including, but not limited to, risks related to Ouster’s limited operating history and history of losses; fluctuations in its operating results; the substantial research and development costs needed to develop and commercialize new products; its ability to maintain competitive average selling prices, high sales volumes and reduce product costs; competition in Ouster's industry; the negotiating power and product standards of its customers; the adoption of its products and the growth of the lidar market generally; product quality and liability risks; Ouster’s future capital needs and ability to secure additional capital on favorable terms or at all; risks related to Ouster's indebtedness; its ability to manage growth, including growing the sales and marketing organization; risks related to international operations, including international manufacturing; cancellation or postponement of contracts or unsuccessful implementations; the Company's ability to manage its inventory; credit risk of customers; Ouster's ability to use tax attributes; Ouster’s dependence on key third party suppliers, in particular Benchmark Electronics, Inc., Fabrinet, and other suppliers; supply chain constraints and challenges; conditions in the industries the Company targets or the global economy; the ability of its lidar technology roadmap and new software solutions to catalyze growth; Ouster’s ability to recruit and retain key personnel; its ability to successfully integrate its business with Velodyne and achieve the anticipated benefits of the Velodyne merger; Ouster’s ability to adequately protect and enforce its intellectual property rights, including as it relates to Hesai Group; legal and regulatory risks; risks related to operating as a public company; and other important factors discussed in the Company’s Annual Report on Form 10-K for the year ended December 31, 2023, as may be further updated from time to time in the Company’s other filings with the SEC. Readers are urged to consider these factors carefully and in the totality of the circumstances when evaluating these forward-looking statements, and not to place undue reliance on any of them. Any such forward-looking statements represent management’s reasonable estimates and beliefs as of the date of this press release. While Ouster may elect to update such forward-looking statements at some point in the future, it disclaims any obligation to do so, other than as may be required by law, even if subsequent events cause its views to change.

1 | 2 | 3  Next Page »
Featured Video
Editorial
Jobs
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 2 for Lam Research at Fremont, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Equipment Engineer, Raxium for Google at Fremont, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise