PTC Acquires NC Graphics

NEEDHAM, Mass.—(BUSINESS WIRE)—May 16, 2007— PTC (Nasdaq: PMTC), the Product Development Company(R), today announced it has acquired NC Graphics Ltd., headquartered in Cambridge, England. The acquisition of NC Graphics is in direct response to customer demand for specialized CAM capabilities required for molds, dies and prototypes. With its Computer Aided Manufacturing (CAM) technology, NC Graphics delivers best-of-breed software for optimizing tool making and high-speed precision machining processes. NC Graphics has more than 1,500 customers in multiple discrete manufacturing vertical markets such as aerospace, automotive, medical equipment and motorsports. With this acquisition, PTC strengthens the link between product design and manufacturing, offering its customers faster production of molds and dies. As a result, parts will be available sooner and at a higher quality level than other non-integrated solutions.

Mold and die shops serve customers using a wide variety of CAD systems to model their products. The ability to create molds and dies quickly and accurately is important to the manufacturing process and overall product development cycle and vital for their business. Additionally, the quality of an end product depends directly on the quality of the tooling. With this acquisition, PTC now offers an open solution to any toolmaker or company requiring high-speed precision machining CAM software, regardless of the source of CAD data. These companies will be able to optimize their mold and die making processes to deliver more complex products faster and with less cost.

NC Graphics has revolutionized the process of producing NC machining toolpaths for molds, dies, and other high-speed precision applications from 3D CAD models. Mold and die makers need this capability to help them optimize their processes to deliver more complex products with less manufacturing lead time and at lower cost. The companies that rely on these outsourced mold and die makers are able to decrease overall product development time, better enabling their response to market demands.

"The global economy is intensely competitive, and the design and manufacturing of mold and die tools is typically on the critical path of a new product introduction cycle," said James Heppelmann, executive vice president software products and chief product officer, PTC. "This acquisition allows customers to work more effectively with their outsourced toolmaker partners by connecting customer CAD data with the toolmaker's CAM system."

PTC has always appreciated the important connection between product design and manufacturing having delivered a broad set of CAM solutions as part of the Pro/ENGINEER(R) product family. Subsequently, PTC expanded its manufacturing strategy with its acquisition of Polyplan for manufacturing process management. The acquisition of NC Graphics, best known for its technology distributed under the DEPOCAM name, further enhances PTC's ability to help customers optimize their manufacturing processes. Combining NC Graphics' mastery of high-speed machining with PTC's Pro/ENGINEER solutions for tool design provides a powerful, end-to-end solution for tool production.

"Today, mold and die design for manufacturing are often outsourced to companies that specialize in developing the fixtures that are used in production processes," said Arthur Flutter, founder and managing director of NC Graphics. "The combination of PTC and NC Graphics will enable manufacturers to effectively manage the data and enable collaboration across multiple locations and suppliers in the supply chain to deliver better quality tools resulting in a design that can be easily manufactured."

NC Graphics customers will be able to continue to use NC Graphics technology stand-alone or as an integral part of PTC's Product Development System (PDS). PTC will offer the NC Graphics technology under the new product name, Pro/TOOLMAKER(TM). Both NC Graphics and PTC are committed to openness and support for heterogeneous environments. Moving forward, PTC plans to manage tool paths created using Pro/TOOLMAKER in Windchill(R), just as it manages Pro/ENGINEER and other CAD data, providing a single source of data that improves secure collaboration among designers, tool makers and manufacturers.

PTC and NC Graphics have many joint customers. One such customer is Racing Technology Norfolk, a member of the Express Composites Group and a leader in advanced composites design, engineering and rapid prototyping for the Motorsports and racing markets. "As a customer of PTC and NC Graphics solutions, we are excited about the opportunity that a best of breed integrated CAM technology will offer," said David Coates, group projects director, Racing Technology Norfolk, Ltd. "PTC's continued investment in manufacturing solutions will enable our Group to achieve business benefits such as improved time-to-market, improved quality and improved customer satisfaction."

The timing of any product release or integration, including any features or functionality, is subject to change at PTC's discretion.

About NC Graphics Ltd

NC Graphics offers leading high-speed machining CAM solutions optimized for tool making and high-speed, precision machining processes. Best known for their market-leading technology distributed under the DEPOCAM name, NC Graphics has revolutionized the process of producing NC machining toolpaths for molds and dies. The privately held company was founded in 1977 by Dr. Arthur Flutter. Today, NC Graphics has 15 employees located in Cambridge, England. For more information on NC Graphics, please visit

About PTC

PTC (Nasdaq: PMTC) provides leading product lifecycle management (PLM), content management and dynamic publishing solutions to more than 40,000 companies worldwide. PTC customers include the world's most innovative companies in manufacturing, publishing, services, government and life sciences industries. PTC is included in the S&P Midcap 400 and Russell 2000 indices. For more information on PTC, please visit

Statements in this press release that are not historic facts, including statements about expanding PTC's addressable markets through the acquisition of N.C. Graphics, the future integration and support of PTC and NC. Graphics products and growth in the CAM market, are forward looking statements that involve risks and uncertainties that could cause actual results to differ materially from those projected. Those risks and uncertainties include the following: We may be unable to successfully develop the technology necessary to provide a best-in-breed integrated CAM solution via N.C. Graphic's technology and PTC products; the market for, and customer adoption of, integrated CAM solutions may not grow as quickly as we expect; we may be unable to retain and maintain relationships with key employees, distributors, customers and other strategic partners of N.C.. Graphics, including those within markets and vertical industries with which PTC has little experience; we may be unable to adequately support multiple solutions on a stand-alone and/or integrated basis that have been acquired through strategic business development initiatives as well as other risks and uncertainties detailed from time to time in reports filed by PTC with the Securities and Exchange Commission, including PTC's most recent reports on Form 10-K and 10-Q.

PTC and its logo, The Product Development Company, Pro/ENGINEER, Windchill, Pro/TOOLMAKER, and all PTC product names and logos are trademarks or registered trademarks of Parametric Technology Corporation or its subsidiaries in the United States and in other countries.


Nicole Rowe, 781-370-6369
Corporate Communications
Email Contact
Weber Shandwick
Amanda Keane, 617-520-7260
Email Contact

Featured Video
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
GIS Analyst for San Bernardino County Transportation Authority at San Bernardino, California
GEOGRAPHIC INFORMATION SYSTEM (GIS) COORDINATOR for Lassen County at Susanville, California
Geodetic Analyst, GIS Center (1282) for Idaho State University at Pocatello, Idaho
Upcoming Events
IMTS 2024 – The International Manufacturing Technology Show at McCormick Place 2301 S Lake Shore Dr Chicago IL - Sep 9 - 14, 2024
FABTECH Orlando 2024 at Orange County Convention Center Orlando FL - Oct 15 - 17, 2024
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025

© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise