|
InventorCAM iMachining Getting Started - 2D Example: Outside shape machining
SolidCAM
|
830 views |
|
|
| «Prev Next» |
| Keywords: SolidCAM, iMachining, MCAD, CAD |
| Description: This is the first recording in a Getting Started series on the iMachining of a Bracket. There are standard 2.5D tool paths (Drilling More » |
| Description: This is the first recording in a Getting Started series on the iMachining of a Bracket. There are standard 2.5D tool paths (Drilling & Profile) and 3D tool paths (HSR & HSS) to aid in the complete CNC program. These iMachining operations are defined to perform the outside shape machining. An end mill of Ø12.5 mm (0.5 in) is used. Two chains are defined, with the first being the stock boundary and the second being the profile around the part. The stock chain is marked as open, which specifies the tool should start machining from that chain. iRough has a 0.25 mm (0.01 in) allowance on the walls, which is then removed by the iFinish operation. Both operations have a -0.63 mm (-0.025 in) Delta depth, so the tool machines deeper than the part bottom edge. « Less |
