STMicroelectronics Reports Q4 and FY 2021 Financial Results

Inventory at the end of the fourth quarter was $1.97 billion, up from $1.84 billion in the year-ago quarter. Day sales of inventory at quarter-end was 91 days compared to 85 days in the year-ago quarter.

Free cash flow (non-U.S. GAAP) was $314 million in the fourth quarter, compared to $512 million in the year-ago quarter.

In the fourth quarter, the Company paid cash dividends to its stockholders totaling $60 million and executed a $86 million share buy-back as part of its share repurchase program launched on July 1, 2021.

ST’s net financial position (non-U.S. GAAP) was $977 million at December 31, 2021 compared to $798 million at October 2, 2021 and reflected total liquidity of $3.52 billion and total financial debt of $2.54 billion.

Business Outlook

The Company’s guidance, at the mid-point, for the 2022 first quarter is:

  • Net revenues are expected to be $3.50 billion, a decrease of 1.6% sequentially, plus or minus 350 basis points;
  • Gross margin of about 45.0%, plus or minus 200 basis points;
  • This outlook is based on an assumed effective currency exchange rate of approximately $1.15 = €1.00 for the 2022 first quarter and includes the impact of existing hedging contracts.
  • The first quarter will close on April 2, 2022.

Conference Call and Webcast Information

STMicroelectronics will conduct a conference call with analysts, investors and reporters to discuss its fourth quarter 2021 financial results and current business outlook today at 9:30 a.m. Central European Time (CET) / 3:30 a.m. U.S. Eastern Time (ET). A live webcast (listen-only mode) of the conference call will be accessible at ST’s website, http://investors.st.com, and will be available for replay until February 11, 2022.

Use of Supplemental Non-U.S. GAAP Financial Information

This press release contains supplemental non-U.S. GAAP financial information.

Readers are cautioned that these measures are unaudited and not prepared in accordance with U.S. GAAP and should not be considered as a substitute for U.S. GAAP financial measures. In addition, such non-U.S. GAAP financial measures may not be comparable to similarly titled information from other companies. To compensate for these limitations, the supplemental non-U.S. GAAP financial information should not be read in isolation, but only in conjunction with the Company’s consolidated financial statements prepared in accordance with U.S. GAAP.

See the Appendix of this press release for a reconciliation of the Company’s non-U.S. GAAP financial measures to their corresponding U.S. GAAP financial measures.

Forward-looking Information

Some of the statements contained in this release that are not historical facts are statements of future expectations and other forward-looking statements (within the meaning of Section 27A of the Securities Act of 1933 or Section 21E of the Securities Exchange Act of 1934, each as amended) that are based on management’s current views and assumptions, and are conditioned upon and also involve known and unknown risks and uncertainties that could cause actual results, performance, or events to differ materially from those anticipated by such statements, due to, among other factors:

  • changes in global trade policies, including the adoption and expansion of tariffs and trade barriers, that could affect the macro-economic environment and adversely impact the demand for our products;
  • uncertain macro-economic and industry trends (such as inflation and fluctuations in supply chains), which may impact end-market demand for our products;
  • customer demand that differs from projections;
  • the ability to design, manufacture and sell innovative products in a rapidly changing technological environment;
  • changes in economic, social, public health, labor, political, or infrastructure conditions in the locations where we, our customers, or our suppliers operate, including as a result of macroeconomic or regional events, military conflicts, social unrest, labor actions, or terrorist activities;
  • unanticipated events or circumstances, which may impact our ability to execute our plans and/or meet the objectives of our R&D and manufacturing programs, which benefit from public funding;
  • legal, political and economic uncertainty surrounding Brexit may be a continued source of instability in international markets and currency exchange rate volatility and may adversely affect business activity, political stability and economic conditions and while we do not have material operations in the U.K. and have not experienced any material impact from Brexit on our underlying business to date, we cannot predict its future implications;
  • financial difficulties with any of our major distributors or significant curtailment of purchases by key customers;
  • the loading, product mix, and manufacturing performance of our production facilities and/or our required volume to fulfill capacity reserved with suppliers or third party manufacturing providers;
  • availability and costs of equipment, raw materials, utilities, third-party manufacturing services and technology, or other supplies required by our operations (including increasing costs resulting from inflation);
  • the functionalities and performance of our IT systems, which are subject to cybersecurity threats and which support our critical operational activities including manufacturing, finance and sales, and any breaches of our IT systems or those of our customers or suppliers;
  • theft, loss, or misuse of personal data about our employees, customers, or other third parties, and breaches of global and local privacy legislation, including the EU’s General Data Protection Regulation (“GDPR”);
  • the impact of intellectual property (“IP”) claims by our competitors or other third parties, and our ability to obtain required licenses on reasonable terms and conditions;
  • changes in our overall tax position as a result of changes in tax rules, new or revised legislation, the outcome of tax audits or changes in international tax treaties which may impact our results of operations as well as our ability to accurately estimate tax credits, benefits, deductions and provisions and to realize deferred tax assets;
  • variations in the foreign exchange markets and, more particularly, the U.S. dollar exchange rate as compared to the Euro and the other major currencies we use for our operations;
  • the outcome of ongoing litigation as well as the impact of any new litigation to which we may become a defendant;
  • product liability or warranty claims, claims based on epidemic or delivery failure, or other claims relating to our products, or recalls by our customers for products containing our parts;
  • natural events such as severe weather, earthquakes, tsunamis, volcano eruptions or other acts of nature, the effects of climate change, health risks and epidemics such as the COVID-19 in locations where we, our customers or our suppliers operate;
  • the duration and the severity of the global outbreak of COVID-19 may continue to negatively impact the global economy in a significant manner for an extended period of time, and also could materially adversely affect our business and operating results;
  • industry changes resulting from vertical and horizontal consolidation among our suppliers, competitors, and customers; and
  • the ability to successfully ramp up new programs that could be impacted by factors beyond our control, including the availability of critical third party components and performance of subcontractors in line with our expectations.

Such forward-looking statements are subject to various risks and uncertainties, which may cause actual results and performance of our business to differ materially and adversely from the forward-looking statements. Certain forward-looking statements can be identified by the use of forward looking terminology, such as “believes,” “expects,” “may,” “are expected to,” “should,” “would be,” “seeks” or “anticipates” or similar expressions or the negative thereof or other variations thereof or comparable terminology, or by discussions of strategy, plans or intentions.  

« Previous Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13  Next Page »
Featured Video
Editorial
Jobs
Mechanical Engineer 2 for Lam Research at Fremont, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Equipment Engineer, Raxium for Google at Fremont, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise