Stratasys Mails Letter to Shareholders Highlighting Nano Dimension's Track Record of Value Destruction

Under Nano CEO Yoav Stern’s oversight, Nano has been trading at a negative enterprise value5 for the last year and a half. In addition, Nano has lost hundreds of millions of dollars of shareholder value under the oversight of the Nano Board. In fact, without the value Stratasys has created for Nano through its 14.1% investment in Stratasys, we would expect that the value destruction will only increase.

With Nano’s track record, we are highly skeptical of the ability of Nano’s nominees - all but one of whom are Nano officers to carry out Stratasys’ significant growth opportunities and strategy to continue delivering value for all Stratasys shareholders.

(5)

 

Source: Company filings; Enterprise Value accounts for Nano’s investment in Stratasys as of Q3 2022.

See Images 1 and 2.

Nano’s Director Candidates are Not Qualified; Don’t Trust them with Your Company and Your Investment

Six of Nano’s seven nominees for the Stratasys Board are current Nano executives, including its CEO Yoav Stern, meaning that there would be significant conflicts of interest between their roles at Nano and their roles as directors of Stratasys.

The only independent nominee put forth by Nano, Zeev Holtzman, previously served on the Stratasys Board and was replaced after a year and a half due to his failure to make the positive contributions we had anticipated based on his venture capital experience. His lack of relevant public company board experience became more apparent during his tenure, and led the Stratasys Board to refrain from nominating him for a second term. This is further accentuated by his consent to serve on a public company board in which he would be the sole independent director and which would be immediately non-compliant with SEC and Nasdaq requirements related to independence.

See Image 3.

Act Now: Protect the Value of Your Investment in Stratasys to Prevent Nano from Destroying Our Strategy for Value-Creation

The Stratasys Board unanimously recommends that Stratasys shareholders vote on the WHITE proxy card “FOR” the re-election of each of Stratasys’ current directors, consisting of: S. Scott Crump, John J. McEleney, Dov Ofer, Ziva Patir, David Reis, Michael Schoellhorn, Yair Seroussi and Adina Shorr.

The Stratasys Board unanimously recommends that Stratasys shareholders vote on the WHITE proxy card “AGAINST” the election of each of Nano’s nominees, consisting of: Yoav Stern, Nick Geddes, Hanan Gino, Zeev Holtzman, Zivi Nedivi, Tomer Pinchas and Yael Sandler.

Furthermore, the Stratasys Board urges shareholders to reject Nano's partial tender offer, deliver a Notice of Objection against the partial offer and NOT to tender their Stratasys shares in the partial offer.

Thank you for your support.
The Stratasys Board of Directors

Materials related to the Meeting can be found at http://www.NextGenerationAM.com/how-to-support-stratasys.

For assistance voting on your WHITE proxy card, please contact your broker or Stratasys’ information agent:

Morrow Sodali LLC 509 Madison Avenue, 12th Floor New York, NY 10022
Call toll-free (800) 662-5200 or (203) 658-9400
Email: SSYS@info.morrowsodali.com

Advisors

J.P. Morgan is acting as financial advisor to Stratasys, and Meitar Law Offices and Wachtell, Lipton, Rosen & Katz are serving as legal counsel.

About Stratasys

Stratasys is leading the global shift to additive manufacturing with innovative 3D printing solutions for industries such as aerospace, automotive, consumer products, healthcare, fashion and education. Through smart and connected 3D printers, polymer materials, a software ecosystem, and parts on demand, Stratasys solutions deliver competitive advantages at every stage in the product value chain. The world’s leading organizations turn to Stratasys to transform product design, bring agility to manufacturing and supply chains, and improve patient care.

To learn more about Stratasys, visit www.stratasys.com, the Stratasys blog, Twitter, LinkedIn, or Facebook. Stratasys reserves the right to utilize any of the foregoing social media platforms, including the Company’s websites, to share material, non-public information pursuant to the SEC’s Regulation FD. To the extent necessary and mandated by applicable law, Stratasys will also include such information in its public disclosure filings.

Stratasys is a registered trademark and the Stratasys signet is a trademark of Stratasys Ltd. and/or its subsidiaries or affiliates. All other trademarks are the property of their respective owners.

Forward-Looking Statements

This document contains forward-looking statements that involve risks, uncertainties and assumptions. If the risks or uncertainties ever materialize or the assumptions prove incorrect, the actual results of Stratasys Ltd. and its consolidated subsidiaries (“Stratasys”) may differ materially from those expressed or implied by such forward-looking statements and assumptions. All statements other than statements of historical fact are statements that could be deemed forward-looking statements.

Such statements are based on management’s beliefs and assumptions made based on information currently available to management. All statements in this communication, other than statements of historical fact, are forward-looking statements that may be identified by the use of the words “outlook,” “guidance,” “expects,” “believes,” “anticipates,” “should,” “estimates,” and similar expressions. These forward-looking statements involve known and unknown risks and uncertainties, which may cause Stratasys’ actual results and performance to be materially different from those expressed or implied in the forward-looking statements. Factors and risks that may impact future results and performance include, but are not limited to those factors and risks described in Item 3.D “Key Information - Risk Factors”, Item 4 “Information on the Company”, and Item 5 “Operating and Financial Review and Prospects” in Stratasys’ Annual Report on Form 20-F for the year ended December 31, 2022, filed with the Securities and Exchange Commission (the “SEC”), and in other filings by Stratasys with the SEC. These include, but are not limited to: factors relating to the partial tender offer commenced by Nano Dimension Ltd. (“Nano”), including actions taken by Nano in connection with the offer, actions taken by Stratasys or its shareholders in respect of the offer and the effects of the offer on Stratasys’ businesses, or other developments involving Nano, the ultimate outcome of the proposed transaction between Stratasys and Desktop Metal, Inc. (“Desktop Metal”), including the possibility that Stratasys or Desktop Metal shareholders will reject the proposed transaction; the effect of the announcement of the proposed transaction on the ability of Stratasys and Desktop Metal to operate their respective businesses and retain and hire key personnel and to maintain favorable business relationships; the timing of the proposed transaction; the occurrence of any event, change or other circumstance that could give rise to the termination of the proposed transaction; the ability to satisfy closing conditions to the completion of the proposed transaction (including any necessary shareholder approvals); and other risks related to the completion of the proposed transaction and actions related thereto. For additional information about other factors that could cause actual results to differ materially from those described in the forward-looking statements, please refer to Stratasys’ periodic reports and other filings with the SEC, including the risk factors identified in Stratasys’ Annual Reports on Form 20-F and its Form 6-K report that published its results for the quarter ended March 31, 2023, which it furnished to the SEC on May 16, 2023. The forward-looking statements included in this communication are made only as of the date hereof. Stratasys does not undertake any obligation to update any forward-looking statements to reflect subsequent events or circumstances, except as required by law.

Important Additional Information

This communication is not an offer to purchase or a solicitation of an offer to sell the ordinary shares of Stratasys. In response to a tender offer commenced by Nano, Stratasys has filed with the Securities and Exchange Commission a Solicitation/Recommendation Statement on Schedule 14D-9. STRATASYS SHAREHOLDERS ARE ADVISED TO READ STRATASYS’ SOLICITATION/RECOMMENDATION STATEMENT ON SCHEDULE 14D-9 AND ANY OTHER RELEVANT DOCUMENTS FILED WITH THE SECURITIES AND EXCHANGE COMMISSION WHEN THEY BECOME AVAILABLE BEFORE MAKING ANY DECISION WITH RESPECT TO ANY TENDER OFFER BECAUSE THEY CONTAIN IMPORTANT INFORMATION. Stratasys shareholders may obtain a copy of the Solicitation/Recommendation Statement on Schedule 14D-9, as well as any other documents filed by Stratasys in connection with the tender offer by Nano or one of its affiliates, free of charge at the SEC’s website at www.sec.gov . In addition, investors and security holders may obtain free copies of these documents from Stratasys by directing a request to Stratasys Ltd., 1 Holtzman Street, Science Park, P.O. Box 2496, Rehovot 7612, Israel, Attn: Yonah Lloyd, VP Investor Relations, or by calling +972-74-745-4029.

Featured Video
Editorial
Jobs
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Equipment Engineer, Raxium for Google at Fremont, California
Senior Principal Mechanical Engineer for General Dynamics Mission Systems at Canonsburg, Pennsylvania
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 3 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise