3D Systems Reports Fourth Quarter and Full Year 2022 Financial Results

Financial Liquidity

At December 31, 2022, the company had cash and cash equivalents and short-term investments of $568,737, a decrease of $220,920 since December 31, 2021. The decrease resulted primarily from cash paid for acquisitions and other investments of $103,647, cash used in operations of $68,395, capital expenditures of $22,499, and taxes paid related to net share settlement of equity awards $10,864. At December 31, 2022, the company had total debt net of deferred financing costs of $449,510.

Subsequent Events

Yesterday, the company resolved its ongoing export controls investigations with the U.S. Department of State, the U.S. Department of Commerce, and the U.S. Department of Justice. The company entered into individual settlement agreements which resulted in civil monetary penalties as well as certain remedial compliance measures to be completed as part of a three year consent agreement.

Q4 and FY 2022 Conference Call and Webcast

3D Systems will delay the filing of its Annual Report on Form 10-K for the fiscal year ended December 31, 2022 and file a Form 12b-25, Notification of Late Filing, with the Securities and Exchange Commission, which extends the deadline to file the Form 10-K. The delay in filing is primarily due to additional time required by the Company to complete its financial reporting close procedures. As a result, the Company's independent registered public accounting firm has not yet completed its audits of the Company's financial statements as of December 31, 2022. It has no impact on the company's operations or on its ability to discuss its 2022 results and 2023 outlook.

The company will host a conference call and simultaneous webcast to discuss these results on March 1, 2023, which may be accessed as follows:

Date: Wednesday, March 1, 2023
Time: 8:30 a.m. Eastern Time
Listen via webcast: www.3dsystems.com/investor
Participate via telephone: 201-689-8345

A replay of the webcast will be available approximately two hours after the live presentation at www.3dsystems.com/investor.

Forward-Looking Statements

Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In many cases, forward looking statements can be identified by terms such as “believes,” “belief,” “expects,” “may,” “will,” “estimates,” “intends,” “anticipates” or “plans” or the negative of these terms or other comparable terminology. Forward-looking statements are based upon management’s beliefs, assumptions and current expectations and may include comments as to the company’s beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company. The factors described under the headings “Forward-Looking Statements” and “Risk Factors” in the company’s periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Although management believes that the expectations reflected in the forward-looking statements are reasonable, forward-looking statements are not, and should not be relied upon as a guarantee of future performance or results, nor will they necessarily prove to be accurate indications of the times at which such performance or results will be achieved. The forward-looking statements included are made only as the date of the statement. 3D Systems undertakes no obligation to update or revise any forward-looking statements made by management or on its behalf, whether as a result of future developments, subsequent events or circumstances or otherwise, except as required by law.

Presentation of Information in this Press Release

3D Systems reports its financial results in accordance with GAAP. Management also reviews and reports certain non-GAAP measures, including: non-GAAP revenue, non-GAAP Gross profit, non-GAAP Gross profit margin, non-GAAP Operating expenses, non-GAAP Operating (loss)/income, non-GAAP Interest and other income/(expense), net, non-GAAP Net income (loss), non-GAAP Basic and Diluted Income (Loss) per Share, adjusted EBITDA and adjusted EBITDA Margin. These non-GAAP measures exclude certain special items that management does not view as part of 3D Systems’ underlying results as they may be highly variable, may be unusual or infrequent, are difficult to predict and can distort underlying business trends and results. Management believes that the non-GAAP measures provide useful additional insight into underlying business trends and results and provide a more meaningful comparison of period-over-period results. Additionally, management uses the non-GAAP measures for planning, forecasting and evaluating business and financial performance, including allocating resources and evaluating results relative to employee compensation targets. 3D Systems’ non-GAAP measures are not calculated in accordance with or as required by GAAP and may not be calculated the same as similarly titled measures used by other companies. These non-GAAP measures should thus be considered as supplemental in nature and not considered in isolation or as a substitute for the related financial information prepared in accordance with GAAP.

To calculate the non-GAAP measures, 3D Systems excludes the impact of the following items:

  • amortization of intangible assets, a non-cash expense, as 3D Systems’ intangible assets were primarily acquired in connection with business combinations;
  • costs incurred in connection with acquisitions and divestitures, such as legal, consulting and advisory fees;
  • stock-based compensation expenses, a non-cash expense;
  • restructuring charges (cost optimization plans), impairment charges, including goodwill, divestiture gains or losses, and severance charges pertaining to senior level employees;
  • certain compensation expense related to the 2021 Volumetric acquisition; and
  • revenue from divestitures included in current and comparable periods necessary to calculate revenue growth excluding the impact of divestitures.

Amortization of intangibles, acquisition and divestiture related costs are excluded from non-GAAP measures as the timing and magnitude of business combination transactions are not predictable, can vary significantly from period to period and the purchase price allocated to amortizable intangible assets and the related amortization period are unique to each acquisition. Amortization of intangible assets will recur in future periods until such intangible assets have been fully amortized. While intangible assets contribute to the Company’s revenue generation, the amortization of intangible assets does not directly relate to the sale of the Company’s products or services. Additionally, intangible asset amortization expense typically fluctuates based on the size and timing of the Company’s acquisition activity. Accordingly, the Company believes excluding the amortization of intangible assets enhances the Company’s and investors’ ability to compare the Company’s past financial performance with its current performance and to analyze underlying business performance and trends. Although stock-based compensation is a key incentive offered to certain of our employees, we continue to evaluate our business performance excluding stock-based compensation; therefore, it is excluded from non-GAAP measures. Stock-based compensation expenses will recur in future periods. Restructuring charges (cost optimization plans), impairment charges, including goodwill, divestiture gains or losses, and severance charges pertaining to senior level employees, are excluded from non-GAAP measures as the frequency and magnitude of these activities may vary widely from period to period. Additionally, impairment charges, including goodwill, are non-cash. Furthermore, 3D Systems excludes contingent consideration recorded as compensation expense related to the 2021 Volumetric acquisition from non-GAAP measures as management evaluates financial performance excluding this expense, which is viewed by management as similar to acquisition consideration.

The matters discussed above are tax effected, as applicable, in calculating non-GAAP net income and basic and diluted earnings per share.

Adjusted EBITDA, defined as net income, plus income tax (provision)/benefit, interest and other income/(expense), net, stock-based compensation expense, amortization of intangibles, depreciation expense and other non-recurring and/or non-cash items all as described above, is used by management to evaluate performance and helps measure financial performance period-over-period.

« Previous Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16  Next Page »
Featured Video
Editorial
Jobs
Manufacturing Test Engineer for Google at Prague, Czechia, Czech Republic
Mechanical Engineer 2 for Lam Research at Fremont, California
Equipment Engineer, Raxium for Google at Fremont, California
Mechanical Test Engineer, Platforms Infrastructure for Google at Mountain View, California
Mechanical Manufacturing Engineering Manager for Google at Sunnyvale, California
Mechanical Engineer 3 for Lam Research at Fremont, California
Upcoming Events
Celebrate Manufacturing Excellence at Anaheim Convention Center Anaheim CA - Feb 4 - 6, 2025
3DEXPERIENCE World 2025 at George R. Brown Convention Center Houston TX - Feb 23 - 26, 2025
TIMTOS 2025 at Nangang Exhibition Center Hall 1 & 2 (TaiNEX 1 & 2) TWTC Hall Taipei Taiwan - Mar 3 - 8, 2025
Additive Manufacturing Forum 2025 at Estrel Convention Cente Berlin Germany - Mar 17 - 18, 2025



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise